Loading ...
Loading ...
Loading ...
10
Manual Cooking
NOTE: To cook at 100% power, begin by touching the number
keypads to enter cook time, then touch START.
To Use:
1. Place food on the turntable and close the door.
2. Touch COOK TIME.
“00:00” will appear in the display. Enter the length of time
to cook.
If cooking with 100% power, skip Step 3.
3. Touch POWER LEVEL.
The default power level PL10 will appear in the display.
Enter the desired power level. See the “Microwave Cooking
Power” section.
4. Touch the Start keypad.
When the cycle ends, “End” will appear in the display and
the end-of-cycle tones will sound.
5. Touch the Cancel keypad or open the door to clear the
display.
Cooking in Stages
The microwave oven can be set to cook at different cooking
powers for various lengths of time, up to two stages which
may include a defrosting stage. See the “Weight Defrost/Timed
Defrost” section to set the defrosting stage.
NOTE: If a defrosting stage is programmed, it will cycle first.
To Cook in Stages:
1. Place food on the turntable and close the door.
2. Touch COOK TIME.
“00:00” will appear in the display. Enter the length of time
to cook during the first stage.
3. Touch POWER LEVEL, then enter the desired cooking
power for the first stage. See the “Microwave Cooking
Power” section.
4. Repeat steps 2 and 3 for the second stage.
5. Touch the Start keypad.
One tone will sound between stages.
When the cycle ends, “End” will appear in the display and
the end-of-cycle tones will sound.
6. Touch the Cancel keypad or open the door to clear the
display.
Cook time may be added in 30-second increments during the
cycling stage by touching Start Add 30 Sec.
Favorite
Use Favorite to program, store, and recall the top three most
frequently used manual cook programs. Each Favorite may
have 1 or 2 stages (see the “Cooking in Stages” section). In the
event of a power failure, the saved Favorites will have to be
reprogrammed.
To Set Favorite:
1. Touch FAVORITE.
“1” will appear in the display. Touch FAVORITE repeatedly to
scroll through “2” and “3,” until the desired Favorite program
number is displayed.
2. Touch COOK TIME, then enter the cook time.
3. Touch POWER LEVEL, then enter the power level.
If programming a second stage, enter the cook time
and power level for that stage (see the “Cooking in
Stages” section).
4. Touch FAVORITE to save program
OR
Touch the Start keypad to begin the programmed cycle.
The program will also be saved.
To Use Favorite:
1. Place food on the turntable and close the door.
2. Touch FAVORITE repeatedly until desired program number
appears in the display.
3. Touch the Start keypad.
When the cycle ends, “End” will appear in the display and
the end-of-cycle tones will sound.
4. Touch the Cancel keypad or open the door to clear the
display.
Sensor Cooking
A sensor in the microwave oven detects humidity released from
the food as it heats and adjusts the cook time accordingly.
Many sensor cycles require the covering of foods. Microwave-
safe containers or steamers with loose-fitting lids are
recommended. The loose-fitting lid allows enough steam to
escape to be detected by the sensor. When covering foods
with plastic wrap, be sure to leave a large enough vent opening
to allow the steam to escape.
“SC” (sensor cook) will appear in the display during sensor
cooking.
NOTES:
■ The microwave oven should be plugged in for at least
3 minutes.
■ The microwave oven cavity and the exterior of the cooking
container should be dry.
■ The room temperature should not exceed 95°F (35°C).
■ If the door is opened while the sensor is detecting moisture
(while “SC” appears in the display), sensing will stop and the
program will be canceled.
Loading ...
Loading ...
Loading ...