Loading ...
Loading ...
Loading ...
5
CONTROL PANEL & FEATURES
POWER/STANDBY/CANCEL BUTTON
Press to turn the dryer on and off.
DRYER CYCLE KNOB
Use your Dry Cycle Knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE BUTTON
Press to start a cycle, or press once while a cycle is in
process to pause it.
MODIFIERS
TEMP LEVEL
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for
a load, select the lower setting rather than the higher
setting.
NOTE: The Air Dry Temp Feature is not available on the
Sensor Cycles.
WRINKLE PREVENT
When you are unable to remove a load of clothes from
the dryer as soon as it stops, wrinkles can form. The
WRINKLE PREVENT feature periodically tumbles,
rearranges, and uffs the load to help keep wrinkles
from forming.
■
Get up to 60 or 150minutes for models with two
choices, 90 minutes for models with only one
choice of heat-free, periodic tumbling at the end
of a cycle. Press the WRINKLE PREVENT button
to turn ON or OFF at any time before the cycle has
ended.
END SIGNAL
The End Signal produces an audible sound when the
drying cycle is nished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
Press END SIGNAL until the desired volume (High or
Low) is selected.
NOTE: When the Wrinkle Prevent setting is selected
and the End Signal is on, the tone will sound every
20minutes until the clothes are removed, or the Wrinkle
Prevent setting ends.
1
2
3
CYCLE STATUS LIGHTS
Lights indicate the progress of the drying cycles.
WET
The load is still wet and/or the cycle just started.
DAMP
This indicator shows that the load is partially dried and
items that you may wish to hang up or iron while still
damp may removed.
COOL DOWN
The dryer has finished drying with heat, and is now
tumbling the load without heat to cool it down and
reduce wrinkling.
DRY
This will indicate that the selected cycle has ended
and the load may be removed from the dryer. If the
Wrinkle Prevent option has been selected, the dryer may
continue to tumble the load, even if the Dry indicator is
lit.
WRINKLE PREVENT
This indicator will light if the Wrinkle Prevent option
has been selected and is running.Get up to 60 or
150minutes for models with two choices, 90 minutes
for models with only one choice of heat-free, periodic
tumbling at the end of a cycle.
2 31
5
4
4
Not all features and options are available on all models.
Appearance may vary.
5
Loading ...
Loading ...
Loading ...