Loading ...
Loading ...
Loading ...
22
Removing and refitting the side racks and catalytic panels
Important!
Only some full ovens have catalytic panels and a lamp in the left oven wall.
To remove a side rack and catalytic panel
1
For easier access to the fixing screws, we recommend removing the oven door first. See
‘Removing and refitting the oven door.’
2
Using a small coin or a flat-head screwdriver, loosen and remove the front and back fixing screws,
as shown.
3
Remove the side rack.
Once you have removed a side rack, the catalytic panel behind it (if fitted) will also be released.
Important!
In some full ovens, the back of the oven is also a catalytic panel, but this is not reversible and should not be
removed.
To refit a side rack and catalytic panel
1
If the oven has catalytic panels, align a panel with the fixing screw holes and hold it in place,
making sure that:
the arrow on the panel is pointing up
if one panel has a hole, it will be on the left oven wall (to fit around the lamp)
2
Loosely screw in the the back fixing screw.
3
Position the side rack. In full ovens, make sure it is the right way up, as shown.
4
Loosely screw in the front fixing screw.
5
Check that both fixing screws are straight, then tighten them.
6
If you removed the door, refit it.
Care and cleaning
Fig.20a Side rack and catalytic panel in full oven cavity Fig.20b Side rack in compact oven cavity
Fixing screw
Fixing screw hole
Loading ...
Loading ...
Loading ...