Loading ...
Loading ...
Loading ...
26
4 Permanent settings in programming mode
Product Coffee
strength
Amount More settings
Milk foam,
milk
– Milk: 1sec.–120sec. Product name, delete/replace/copy
product
Hot water,
hot water for
green tea
– Water: 25ml–450ml Temperature (low, normal, high),
product name, delete/replace/copy
product
Permanent settings in programming mode always follow the same
model.
Example:Proceed as follows to change the coffee strength for one
espresso.
Precondition:The start screen is displayed.
T Touch
‘Espresso’ for about 2 seconds until the list of possible
settings is displayed.
T Touch ‘Product settings’.
‘Espresso’
T Move your finger across the display until ‘Coffee strength’ is
displayed in the centre.
T Now move your finger to the left or right to change the set-
ting for the coffee strength.
T Touch
‘Save’.
‘Saved’ appears briefly on the display.
T Touch
‘Back’ the number of times needed to display the start
screen again.
By instructing your S8/S80 to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your S8/S80 switches off automatically after the preset time follow-
ing the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
Precondition:The start screen is displayed.
T Touch
‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
Automatic switch-off
Loading ...
Loading ...
Loading ...