Loading ...
Loading ...
Loading ...
Installing the appliance
of the screws.There are one set of screw holes in each
corner of the hob(H).
Slightly tighten a screw(C) through the bracket(B) so
that the bracket is attached to the hob, but so that you
can still adjust the position
.
ti rewol yltneg neht dna revo kcab boh eht nrut ylluferaC .2
into the aperture hole that you have cut out.
a otni stekcarb eht tsujda ,boh eht fo htaenrednu eht nO .3
position that is suitable for your worktop.
Then fully tighten the screws(C) to secure the hob into
position.
(A) SEALING STRIP
(C) SCREW (B) BRACKET
H
H
H
H
appliance upside down and place it on a
cushioned mat.
supervision devices are not damaged in this
operation.
2. Apply the sponge provided around the
edge of the appliance.
ro tnega gnilaes eht ni pag a evael ton oD .3
overlap the thickness.
Sp
on
g
e
Bottom view
(Stainless steel model) (Glass model)
The thickness of the sponge in stainless model is 1.5mm
The thickness of the sponge in glass model is 3.0mm
(A)The width of the sponge is 10mm
(B)The width of the sponge is 20mm
(A)
(B)
23 _Installaon Of Appliance
(B)
(A)
Loading ...
Loading ...
Loading ...