Loading ...
Loading ...
Loading ...
5
YOUR DEEP FRYER IS SUPPLIED WITH A CORD
SET WITH MAGNETIC CONNECTOR:
First fit the magnetic connector to the appliance, as
seen in Figure 3B, making sure that the protruding
part of the connector (X) is correctly inserted in the
corresponding slot on the appliance, and then plug
the cable into the power outlet.
Warning
Never leave the appliance plugged into the power
outlet if the magnetic connector is not fitted to the
deep fryer, Figure 3. If the magnetic connector does
not remain in place, check that it has been inserted
correctly, see Figure 3B. If the problem persists, con-
tact an authorized service center. When the applian-
ce is powered, always leave some free space around
the magnetic connector, so as to prevent it from
becoming detached. Only use a type MC-316 cord
set supplied by De’longhi authorized service cen-
ters.
WARNING
SERIOUS HOT-OIL BURNS MAY RESULT FROM A
DEEP FAT FRYER OR COOKER/FRYER BEING
PULLED OFF OF A COUNTERTOP. DO NOT
ALLOW THE CORD TO HANG OVER THE EDGE
OF THE COUNTER WHERE IT MAY BE GRABBED
BY CHILDREN OR BECOME ENTANGLED WITH
THE USER.
DO NOT USE WITH AN EXTENSION CORD.
DO NOT DRAPE CORD!
KEEP FROM
CHILDREN!
DESCRIPTION OF THE APPLIANCE:
A. Thermostat knob for setting the temperature
B. Oil temperature light (red, green)
C. Safety micro-switch
D. MIN– MAX level indicators
E. Basket support
F. Viewing window
G. Filter
H. Housing
I. Handles
J. Slots for fitting the control unit
K. Cover with handle slots
L. Removable bowl
M. Basket with folding handle
N. Electrical heating element
O. Cable compartment
P. Hooks for fastening the control box to the
appliance
Q. Thermal safety device reset
R. Control unit
S Oil drain tap
T. Oil drain tap cover
THERMAL SAFETY DEVICE
The appliance is fitted with a thermal safety device
that stops the appliance from heating in the event of
incorrect use or irregular operation. Once the
appliance has cooled, using a toothpick or similar,
delicately press the safety device reset button “Q”
(see Fig. 1). If the appliance does not start operating
again, contact a service center authorized by the
manufacturer.
OPERATING INSTRUCTIONS
Before using the deep fryer for the first time, careful-
ly clean, using warm water and dishwashing deter-
gent, the basket, the bowl and the cover. The control
unit, power cable and heating element may be clea-
ned using a damp cloth. Check that water does not
enter into the control unit and that there is no resi-
dual water in the bottom of the removable bowl.
Carefully dry all the parts. Check that the control unit
is properly fastened to the deep fryer body. The
safety micro-switch “C” will not allow the appliance
to be operated if the control unit “R” is not correctly
positioned in the housing “H”. The deep fryer is now
ready for use.
FILLING WITH OIL OR FAT
• Remove the cover “K”, lifting it by the handle. Turn
the folding handle of the basket until it locks into
place (pos. 2, Fig. 2). Remove the basket “M” by
lifting it upwards.
• Remove the length of cable required to connect the
appliance to the mains, from the cable compart-
ment “O” (see Fig. 3A). The oil temperature light
“B” becomes green.
If your fryer is supplied with magnetic connector:
Loading ...
Loading ...
Loading ...