Loading ...
Loading ...
Loading ...
36
FEATURES AND CONTROLS
All Wheel Drive System
The All Wheel Drive system
is controlled by the AWD
momentary switch.
Engage AWD before getting
into conditions where front
wheel drive may be needed.
If the rear wheels are
spinning, release the throttle
before switching to AWD.
• Move the momentary
switch to the right to
engage AWD.
• Move the momentary switch to the right, past the AWD setting, to
engage 4WDC (if equipped).
• Move the momentary switch to the far left to operate in two-wheel
drive (2X4).
NOTICE: Switching to AWD or 4WDC (if equipped) while the rear wheels are
spinning may cause severe drive shaft and gearcase damage.
Always switch to AWD or 4WDC (if equipped) while the rear wheels
have traction or are at rest.
AWD Mode
Move the momentary switch to the right to engage AWD (4X4). AWD
will engage when engine speed slows to below 3100 RPM. The gauge
will display “AWD”.
There is no limit to the length of time the vehicle may remain in AWD.
The vehicle automatically engages AWD when operating in reverse if
the switch is set to the AWD position.
Once enabled, AWD remains enabled until the switch is turned off. If
the switch is turned off while the demand drive unit is moving, it will
not disengage until the rear wheels regain traction.
When in AWD, the demand drive unit will automatically engage any
time the rear wheels lose traction. When the rear wheels regain traction,
the demand drive unit will automatically disengage.
AWD
Switch
Loading ...
Loading ...
Loading ...