Loading ...
Loading ...
Loading ...
118
MAINTENANCE
Lights
Headlight Lamp Replacement
When servicing a halogen lamp, don't touch the lamp with bare fingers.
Oil from your skin leaves a residue, causing a hot spot that will shorten
the life of the lamp. If fingers do touch a lamp, clean it with denatured
alcohol.
1. 450 HO: 450 HO models do not have a pod headlight. See page 120
for lower headlamp replacement.
570/570 EPS/X2: Remove the two screws on the lower front
corners of the headlight pod. Remove the screw from the rear of the
pod. Lift the pod slightly while depressing the tabs at the rear of the
pod. Lift the pod cover and disconnect the speedometer harnesses
from the speedometer.
CAUTION! Hot components can cause burns to skin. Allow lamps to cool
before servicing.
2. Unplug the headlamp from the wiring harness. Be sure to pull on the
connector, not on the wiring.
3. Turn the lamp counter-clockwise to remove it.
4. Apply dielectric grease to the socket and install the new lamp. Make
sure the tab on the lamp locates properly in the housing.
5. Reassemble the pod.
Loading ...
Loading ...
Loading ...