Loading ...
Loading ...
Loading ...
7
REVERSING THE DOOR
The hinge pin must be removed and relocated onto the
opposite side of the bracket. Remove the nut and
washers, relocate the pin, then fasten. The hinge pin
should now be pointing upward for the door to fit onto.
Fasten the adjustable leg and frame screw into the right
underside of the freezer.
Remove the caps covering the bolt holes and door from
the left top side. Place the door onto the bottom hinge
pin.
Place the hinge on the left side and align the holes
before screwing in bolts. Do not tighten bolts completely
until after aligning the door and ensuring proper seal
between the door and the freezer. Replace the hinge
cover.
Once the door is in place and all bolts (top hinge bracket
and bottom hinge bracket) are securely tightened, insert
caps on right side of the freezer and door.
6.
7.
9.
8.
10.
step 6
step 7
step 8
step 9a
step 10
step 9b
Loading ...
Loading ...
Loading ...