Loading ...
Loading ...
Loading ...
58
EN
Using NutriCook
• Every time you use your cooker, first check that the
control module is correctly fitted and tightened (using
a coin) and check that the operating valve (L) located
inside the lid can move, by moving the programme
selector (F) to and pressing the valve with your
finger. Fig. 17.
• Also check that the safety valve (M) can move:
see Fig. 18 and refer to the "Cleaning and
Maintenance" heading.
• Close the NutriCook.
• Move the selector to one of the programmes as shown
in your recipe book. Fig. 9.
• Programme the timer for the cooking time shown for
your recipe. Fig. 10.
• Place the NutriCook on a heat source set to maximum
power.
• When the signal sounds, the timer indicates that you
need to turn the heat down so there is a constant,
steady release of steam.
➩ Pressure cooking starts and the timer counts down.
• Once the pressure cooking phase is finished, the signal
sounds and the timer indicates that you need to turn
off the heat and move the cooking programme
selector to . Fig. 8.
• A jet of hot steam, and possibly droplets of water,
escapes from the steam outlet (A) in a vertical
direction.
➩ The soft pressure cooking phase starts (this time is
ready programmed).
• If you accidentally open your NutriCook during the soft
cooking phase, close it back up immediately, and this
will have no effect on cooking.
• Never remove the timer during the pressure cooking or
soft pressure cooking phases.
• When the soft pressure cooking phase is finished, the
timer's signal sounds indicating that cooking is
finished. .
• Check that the pressure indicator (D) has dropped back
down.
• Raise the Open/Close handle to the vertical position to
open the lid. Fig.1.
Before cooking
During cooking
Finishing cooking
Just like for any other
cooking appliance,
always pay close
attention to it,
especially when using
NutriCook near
children.
The steam jet coming
from the steam release
outlet (A) is very hot.
To move NutriCook, use
the carrying handles on
the side of the cooker.
Always position the
NutriCook so that the
programme selector (F)
faces you.
decompression valve
IFU Nutricook SEB TEFAL_9L 4135696:4135696 4/01/10 14:58 Page 63
Loading ...
Loading ...
Loading ...