Loading ...
Loading ...
Loading ...
15
To Remove Metal Grease Filters:
1. Turn off fan and lights.
2. Remove the filter holder frame and grease filter using a
flat-blade screwdriver to turn the grease filter release screws
90° counterclockwise.
To Replace Metal Grease Filter:
Replace grease filter and filter holder frame into range hood.
Align the grease filter release screw and use a flat-blade
screwdriver to turn the grease filter release screws 90° clockwise
to lock in place.
Charcoal Filters - For Non-Vented
(recirculating) Installations
NOTE: After approximately 3 years of use the charcoal filter
should be replaced. To order a replacement Charcoal Filter Kit,
see the “Assistance or Service” section.
The charcoal filters can be cleaned and reactivated. Clean the
filter in the dishwasher using normal detergent and choosing the
highest temperature setting.
To reactivate the filter, the filter should be dried in an oven for
10 minutes with a maximum temperature of 210°F (100°C).
To Remove Charcoal Filters:
1. Turn fan and lights off.
2. Remove the metal grease filters. See “Metal Grease
Filters” section.
3. Remove the upper and side lock springs.
4. Clean or discard the charcoal filter.
To Replace Charcoal Filters:
1. For non-vented (recirculating installations) install charcoal
filter, wrapping it around the grease filter.
2. Place the charcoal filter mat around the grease filter and
fix it in place by using the cap lock springs provided.
3. Position the upper cap and fix it in place using the cap lock
spring provided.
A. Grease filter release screw
B. Filter holder frame
C. Grease filter
C
B
A
A. Charcoal filter mat
B. Grease filter
C. Charcoal filter side lock springs
D. Upper cap
E. Cap lock spring
F. Grease filter support
Loading ...
Loading ...
Loading ...