HPA060 User Manual

Loading ...

HOW YOUR AIR PURIFIER WORKS

This model air purifier incorporates a 2-stage cleaning

system to help clean the air that passes through the filter

in the unit (Fig. 1).

Stage 1: Household Gas & Odour Reducing Pre-Filter

Stage 2: True HEPA Filter that captures particles

as small as 0.3 microns or larger

Filter(s)

Odour Reducing

Pre-Filter

STAGE 1

STAGE 2

Fig. 1

• Selectafirm,levelandflatlocation.Forbestairflow,locatetheunitsoitisnotdirectlyupagainstthe

wall or against any furniture. This will enhance performance.

• Whenoperating,largevolumesofairaredrawntowardtheairpurifier.Surroundingareasshouldbe

cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminates. This may

also help prolong the life of the filter. If the unit is placed on a light coloured carpet, a small mat or rug

should be used underneath to prevent permanent staining. This is especially important in homes with

contamination from smoking, fireplaces, or where candles are burned.

• Ensurethefrontoftheunitfacesawayfromtheclosestwallorfurniture.

• Ensurenogrillesareblocked.

SET-UP

The True-HEPA Filter(s) are supplied within the air purifier. They are wrapped to

ensure purity, and are labeled to help identify the proper replacement filter

(Type

)

• Beforeusing your new air purifier you must remove the wrapper covering the

filter(s).MakesuretheairpurifierisOFFandunplugged.Whilepressingonthe

tab at the top of the rear grille, pull the grille towards you and remove it from the

unit and set it aside (See Fig. 2). Grasp the sides of each filter frame near its top

end and pull outward. Repeat for the second filter if applicable.

• Removeprotectivewrapfromthefilter(s).

• PlacetheHEPAfilter(s)intotheairpurifierhousingwiththearrowspointing

toward the unit. Insert the bottom edge of the filter frame and press the top of

the filter down and inward until the filter is firmly in place. Repeat for the second

filter if applicable.

Fig. 2

Install the Household Gas & Odour Reducing Pre-Filter that is supplied within the air purifier. It will be

wrapped in plastic wrap to keep it fresh (Type ).

• Removethepre-filterfromtheprotectiveplasticbag.

•Securethepre-filterunderthepre-filterclipsontheinsideofthereargrille.

• Replacethereargrillebyliningupthetabatthebottomofthegrillewiththeslotintheairpurifier.

Push the top of the grille towards the unit until it snaps in place. Snap the filter grille back into place.

INSTALL TRUE HEPA FILTERS AND ODOUR REDUCING PRE-FILTER

Loading ...

User Manual - Page 3