Loading ...
Loading ...
Loading ...
www.oster.com
www.oster.com
8
9
CARE & CLEANING
CLEANING
Your Skillet should be cleaned after every use.
1. Turn the variable temperature control to O. Unplug the skillet
and allow it to cool completely before cleaning.
NOTE: To protect the Titanium Infused DuraCeramic™ coating, do
not run cold water over cooking surface immediately after use.
2. Remove variable temperature control probe. DO NOT IMMERSE
VARIABLE TEMPERATURE CONTROL PROBE, cord or plug in
water or any other liquid.
3. The skillet and the lid are HAND WASH ONLY. Wash with hot,
soapy water; skillet may be immersed in water. Rinse and dry
thoroughly.
4. DO NOT use steel wool or other metal pads as this may scratch
the surface.
NOTE: Never use abrasive cleaning agents to clean your appliance
as this may damage the surfaces.
5. Wipe the temperature control with a damp cloth and wipe dry.
CAUTION: The VARIABLE TEMPERATURE CONTROL PROBE must
always be completely dry before use.
For proper care of your Titanium Infused DuraCeramic™
coated skillet, follow the following steps if stubborn stains
appear:
1. Sprinkle some baking soda on the stained area.
2. Add enough water to moisten the baking soda, making a paste
like texture.
3. Let sit for a few minutes (for tougher stains let sit up to an
hour).
4. Lightly scrub with a plastic scouring pad or damp cloth and dry
thoroughly.
5. Repeat if necessary.
Should any stubborn stains appear, they will not aect the
performance and nonstick quality of the Titanium Infused
DuraCeramic™ coating.
USER MAINTENANCE:
Periodically check for looseness and retighten the handle / feet
screws. Do not overtighten.
CAUTION: Overtightening can result in stripping of screws or nuts
or cracking of handle or feet.
This appliance has no user serviceable parts. Any servicing beyond
that described above and in the Cleaning Section should be
performed by an Authorized Service Representative only. See
Warranty Section.
STORAGE
• Unplug unit and allow to cool. Never store unit while it is hot.
• Clean and thoroughly dry the skillet before storing.
• For convenience, the temperature control probe can be stored
inside the covered electric skillet.
• To avoid scratching the nonstick ceramic surface, place a paper
towel into the skillet.
CKSTSK16H-TECO_17ESM1.indd 8-9 8/7/17 09:02
Loading ...
Loading ...
Loading ...