Loading ...
Loading ...
Loading ...
CONTROL FEATURES AND FUNCTIONS
8
4
Rinse
Before starting, press this button to adjust the RINSE times from 1 time
to 3 times and select Water Cycle function to your selected wash
program.
NOTE: When the Water Cycle function is selected, there will be no
drainage and spinning after the last rinse, and the water will remain in the
tub. If drainage or spinning are required, customer should re-select a
Drain or Spin program.
5
Child Lock
Once a wash program has started, press both Rinse and Program for 3
seconds to lock all buttons on the control panel except ON/OFF. Repeat
the process to unlock the control panel.
NOTE:
When the Child Lock starts, an alarm will occur if the lid is opened during
operation. In 20 seconds, there will be an "E3" alarm. If the lid is closed
within 20 seconds, the alarm will be cancelled and the machine will
continue to run the previous program. After 20 seconds, the display will
show "CL" alarm, called "normal fault alarm". The drain pump will start
working for 90 seconds and drain the water from the washing machine.
This alarm is displayed every 15 minutes and is released only when the
machine is powered off or unplugged.
6
Program
Press this button to select from the 8 wash programs.
Jeans - Quick - Blanket - Delicates will be selected when the
corresponding light is solid
Soaking - Standard - Baby Clothes - Drum Clean will be selected when
the corresponding light is flashing
7
Temp.
Press this button to select the water temperature used during a wash.
Choose between hot, cold and warm (both hot and cold lights will be
displayed to indicate warm).
8
Start/Pause
Press this button once a wash program has been selected to start the
program. Once a wash has begun, press this button to pause the
program. Press Start/Pause again to resume.
9
ON/OFF
Press this button to switch the washer on and off.
Press once to switch on. When finished a wash program, press to switch
off.
Note:
The clothes washer will automatically stop if the lid is left open once the SPIN cycle
begins. If this occurs, there will be a warning buzzer and error code displayed. The
clothes washer will not start a wash cycle if the selected water level can not be
reached. Please refer to Page 14 for troubleshooting instructions.
Loading ...
Loading ...
Loading ...