Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
There is no good cooking per-
formance using the Plus Steam
function.
You did not fill the cavity em-
bossment with water.
Refer to "Activating the Plus
Steam function".
The water in the cavity em-
bossment does not boil.
The temperature is too low. Set the temperature at least to
110°C. Refer to "Hints and
Tips" chapter.
The water comes out of the
cavity embossment.
There is to much water in the
cavity embossment.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct
amount of water to the cavity
embossment. Refer to "Activat-
ing the Plus Steam function".
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the oven cavity. Do not remove the rating plate from
the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
WARNING! Refer to Safety chapters.
TECHNICAL DATA
Dimensions
Height 894 - 912 mm
Width 600 mm
Depth 609 mm
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
A
27
Loading ...
Loading ...
Loading ...