Loading ...
Loading ...
Loading ...
(344,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
& Vehicle Dynamics Control
system monitor
S07AN01
Refer to “Vehicle Dynamics Control warn-
ing light/Vehicle Dynamics Control opera-
tion indicator light” FP183 and “Vehicle
Dynamics Control OFF indicator light”
FP184.
& Vehicle Dynamics Control
OFF switch
S07AN02
Press the Vehicle Dynamics Control OFF
switch to deactivate the Vehicle Dynamics
Control system. Creating adequate driving
wheel slip by deactivating the Vehicle
Dynamics Control system may help to
recover from the loss of traction. Use the
Vehicle Dynamics Control OFF switch as
necessary.
. A standing start on a steeply sloping
road with a snowy, gravel-covered, or
otherwise slippery surface
. Extrication of the vehicle when its
wheels are stuck in mud or deep snow
When the switch is pressed with the
ignition switch in the “ON” position, the
Vehicle Dynamics Control OFF indicator
light “
” on the combination meter illumi-
nates. The Vehicle Dynamics Control
system will be deactivated and the vehicle
will behave like a model not equipped with
the Vehicle Dynamics Control system.
When the switch is pressed again to
reactivate the Vehicle Dynamics Control
system, the Vehicle Dynamics Control
OFF indicator light turns off.
With the Vehicle Dynamics Control system
deactivated, traction and stability en-
hancement offered by the Vehicle Dy-
namics Control system is unavailable.
Therefore, you should not deactivate the
Vehicle Dynamics Control system except
under the above-mentioned situations.
NOTE
. When the switch has been pressed
to deactivate the Vehicle Dynamics
Control system, the Vehicle Dynamics
Control system automatically reacti-
vates itself the next time the ignition
switch is turned to the “LOCK”/“OFF”
position and the engine is restarted.
. If the switch is held down for 30
seconds or longer, the indicator light
turns off, the Vehicle Dynamics Control
system is activated, and the system
ignores any further pressing of the
switch. To make the switch usable
again, turn the ignition switch to the
“LOCK”/“OFF” position and restart the
engine.
. When the switch is pressed to
deactivate the Vehicle Dynamics Con-
trol system, the vehicle’s running per-
formance is comparable to that of a
vehicle that does not have a Vehicle
Dynamics Control system. Do not de-
activate the Vehicle Dynamics Control
system except when absolutely neces-
sary.
Vehicle Dynamics Control system
342
Loading ...
Loading ...
Loading ...