Loading ...
Loading ...
Loading ...
Fault, what to do? en
45
Appliance cannot be
switched on or operated.
Malfunction. Disconnect appliance from the power
supply; pull out the mains plug or switch
off the fuse. Wait at least 5 seconds, then
connect the appliance to the power
supply.
Appliance does not start. The mains fuse has tripped. Check mains fuse.
Power cord not inserted. Ensure that the power cord is plugged all
the way into the back of the appliance and
into the socket. Check that the socket
functions.
The appliance door has not been
shut properly.
Close the door.
Programme starts
automatically.
You did not wait until programme
ended.
Perform reset.
(“Terminating the programme”)
Door does not open
automatically at the end of
the Eco 50° programme.
Eco drying deactivated. Activate Eco drying. ~ "Operating the
appliance" on page 28
The child-proof lock is activated. Deactivate childproof lock. ~ "Operating
the appliance" on page 28
Eco 50° programme not
selected.
Select Eco 50° programme.
Additional functions selected. Deselect additional functions.
ExtraDry is switched on. Switch off ExtraDry.
Door is not set correctly. Set the door correctly with the aid of the
installation instructions so that the door
gap is at least 70 mm - 100 mm.
Wrong screws used to adjust the
door gap. If excessively long
screws are screwed in, they may
deactivate Eco drying.
To adjust the door gap, use screws which
have a max. size of ø 4X30 (included in
the product package, see installation
instructions).
Door and door seal dirty. Clean door and door seal with a damp
cloth and a little washing-up liquid.
Safety device switches the Eco
drying function off. A technical
fault has probably occurred.
Call the after-sales service.
Fault Reason Remedial action
*Depending on the features of your dishwasher
Loading ...
Loading ...
Loading ...