Loading ...
Loading ...
Loading ...
Time-setting options en
15
1. Press the 0 button repeatedly until the Q symbol is
selected.
2. Use the ( and) buttons to set the timer duration.
– Default value for the ( button = 5 minutes
– Default value for the ) button = 10 minutes
The setting is applied
automatically. The timer duration starts to count
down after a few seconds.
Note: When the set time has elapsed, a signal sounds.
To end the timer, press the 0 button.
Setting the cooking time
Once the set cooking time has elapsed, the appliance
switches off automatically. The function can only be
used in combination with a type of heating.
1. Set the heating function and temperature.
2. Press the 0 button repeatedly until the symbol for
the switched-on oven and the x symbol are
highlighted.
3. Use the ( and ) buttons to set the cooking time.
– Default value for the ( button = 10 minutes
– Default value for the ) button = 30 minutes
The setting is applied automatically. The appliance
starts to heat after a few seconds. The cooking time
counts down in the display.
Once the cooking time has elapsed, an audible signal
sounds and the appliance brings the operating mode to
an end automatically.
To switch off, turn the function selector back to the "Off"
position.
Setting the end time
You can delay the time at which cooking is due to
finish. You can, for example, put your food in the
cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Notes
■ Ensure that food is not left in the cooking
compartment for too long as it may spoil.
■ Do not adjust the end time once the appliance is
already in operation. Otherwise the cooking result
would no longer be satisfactory.
1. Place the food onto the appropriate accessory in the
cooking compartment and close the appliance door.
2. Set the heating function and temperature.
3. Press the 0 button repeatedly until the symbol for
the switched-on oven and the x symbol are
highlighted.
4. Use the ( and ) buttons to set the cooking time.
5. Press the 0 button repeatedly until the y symbol is
highlighted.
6. Use the ( and ) buttons to set the end time.
The appliance applies the settings after a few
seconds. The end time is shown in the display. Once
the appliance starts, the time begins counting down.
As soon as the end time has been reached, an audible
signal sounds and the appliance ends the operation
automatically.
To switch off, turn the function selector back to the "Off"
position.
Setting the time
You can only change the time when no other time-
setting option is active and the function selector is at
the "Off" position.
1. Press the 0 button repeatedly until the 0 symbol is
selected.
2. Use the ( or ) button to change the time.
The appliance applies the time after a few seconds.
Note: You can go to the basic settings to specify
whether or not the time should be shown in the display.
Checking, changing or deleting settings
1. Press the 0 button repeatedly until the appropriate
symbol is selected.
2. If required, use the ( or ) button to change the
setting. To delete a time-setting option, set ‹‹:‹‹.
The setting is applied automatically.
Loading ...
Loading ...
Loading ...