Loading ...
Loading ...
Loading ...
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
3. Insert the connector into the power
socket inside the vehicle.
4. Correct the tire inflation pressure to at
least 2.0 bar.
– Increase tire inflation pressure: with
the ignition switched on or the en-
gine running, switch on the com-
pressor.
– Reduce tire inflation pressure: press
the button on the compressor.
5. Unscrew the connection hose of the
compressor from the tire valve.
6. Pull the connector out of the power
socket inside the vehicle.
7. Stow the Mobility System in the vehicle.
Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor, refer to
page 154.
Reset the Tire Pressure Monitor, refer to
page 150.
Replace the nonworking tire and the sealant
container of the Mobility System promptly.
Snow chains
Safety information
Warning
With the mounting of snow chains on un-
suitable tires, the snow chains can come
into contact with vehicle parts. There may
be a risk of accident or risk of damage to
property. Only mount snow chains on tires
that are designated by their manufacturer
as suitable for the use of snow chains.
Warning
Insufficiently tight snow chains may dam-
age tires and vehicle components. There
may be a risk of accident or risk of damage
to property. Make sure that the snow
chains are always sufficiently tight. Re-
tighten as needed according to the snow
chain manufacturer's instructions.
Fine-link snow chains
The manufacturer of the vehicle recom-
mends the use of fine-link snow chains. Cer-
tain types of fine-link snow chains have
been tested by the manufacturer of the ve-
hicle and recommended as road-safe and
suitable.
Information regarding suitable snow chains
is available from a dealer’s service center or
another qualified service center or repair
shop.
Seite 282
MOBILITY Wheels and tires
282
Online Edition for Part no. 01402667330 - VI/19
Loading ...
Loading ...
Loading ...