Loading ...
Loading ...
Loading ...
Switching off
Press the button on the steering
wheel.
The displays go out. The stored desired
speed is deleted.
Interrupting manually
When active, press the button on
the steering wheel.
Interrupting automatically
The system is automatically interrupted in
the following situations:
– When the driver applies the brakes.
– If the clutch pedal is depressed for a few
seconds or released while a gear is not
engaged.
– If the gear engaged is too high for the
current speed.
– If selector lever position N is set.
– Dynamic Traction Control DTC is acti-
vated or DSC Dynamic Stability Control
is deactivated.
– If DSC Dynamic Stability Control inter-
venes.
Setting the speed
Maintaining/storing the speed
Press or button in the interrupted
state.
When the system is switched on, the cur-
rent speed is maintained and stored as the
desired speed.
The stored speed is displayed in the instru-
ment cluster.
DSC Dynamic Stability Control is switched
on, if necessary.
The speed can also be stored as follows:
Press the button.
Changing the speed
or button: press until the desired
speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when
the road is clear.
– or button: each time it is pressed
to the point of resistance, the desired
speed increases or decreases by approx.
1 mph/1 km/h.
– or button: each time it is pressed
past the resistance point, the desired
speed changes by a maximum of 5 mph/
10 km/h.
– or button: pressing it to the re-
sistance point and holding it accelerates
or decelerates the vehicle without re-
quiring pressure on the accelerator
pedal. After the button is released, the
vehicle maintains its final speed. Press-
ing the switch beyond the resistance
point causes the vehicle to accelerate
more rapidly.
Continuing cruise control
General information
An interrupted cruise control can be contin-
ued by calling up the stored speed.
Make sure that the difference between cur-
rent speed and stored speed is not too large
before calling up the stored speed. Other-
wise, unintentional braking or accelerating
may occur.
Calling up the stored speed
Press the button on the steering
wheel.
The stored speed is reached again and main-
tained.
Seite 179
Driving comfort CONTROLS
179
Online Edition for Part no. 01402667330 - VI/19
Loading ...
Loading ...
Loading ...