Loading ...
Loading ...
Loading ...
English 29
Operations
03 Dry Time
Press to adjust the cycle time for TIME DRY, WARM AIR, and
COOL AIR (DV**N62**** models only) cycles.
The following time options (unit: minute) are available: 30, 60,
90, 120, and 150.
• 120 minutes and 150 minutes are not available for WARM
AIR and COOL AIR (DV**N62**** models only) cycles.
• The exact drying time differs depending on the humidity of
the load.
04
Dry Level
Press to select the dryness level in the AIR WASH
, COTTON, MIXED LOAD, SYNTHETICS, and SILENT DRY
(DV9*N82**** models only) cycles. The dryness can be set in three
levels (1-3). Level 1 is used to partially dry items that lay at or
hang to dry. Level 3 is the strongest and is used to dry larger or
bulk loads.
05
Damp Alert
This alert is available only with COTTON, MIXED LOAD,
SYNTHETICS and SILENT DRY (DV9*N82**** models only) cycles. If
a load contains mixed fabrics, the Damp Alert indicator ( ) blinks
when the average dryness of the item is 80 % dry. This lets you
take items that you don’t want fully dried or that dry quickly out
of the dryer early while letting others continue to dry.
06
Wrinkle
Prevent
Adds approximately 3 hours of intermittent tumbling at the
end of the selected cycle to reduce wrinkles. To activate, press
Wrinkle Prevent. The wrinkle prevent indicator blinks, and
zero appears on the display.
07
Alarm Off
Press to mute/unmute the alarm. The sound setting is retained
when you turn the dryer off and turn it on again.
08
Drum Light
Press to turn on or off the interior lamp. The lamp stays lit for 2
minutes after it has turned on, and then turns off automatically.
09
Smart Control
After connecting the dryer to your home network using the
SmartThings app, you can control dryer remotely. The
Smart
Control indicator blinks. The loader enters waiting mode for
remote commands. For more information, see the SmartThings
section on page 40.
10
Start/Pause
(Hold to Start)
Press and hold to start an operation, or press to stop an
operation temporarily.
Untitled-33 29 7/30/2019 6:56:06 PM
Loading ...
Loading ...
Loading ...