Loading ...
Loading ...
Loading ...
pull tabs
facing out
Figure 1.1
8
GETTING STARTED
Figure 1.2
1. Pull the handle of the filter cover to open the housing.
Remove the air filter from the housing. [Figure 1.1]
2. Take the filter out of its plastic packaging, then reinstall it into
the housing. Make sure the pull tabs on the filter are facing
out. [Figure 1.2]
NOTE: If you are not planning to use the air purifier for a long period of time, we recommend leaving the filter
inside its plastic packaging until it is ready to be used, to keep it clean.
Figure 1.3
Figure 1.4
3. Replace the filter cover by lining up the cover’s feet with the
matching slots on the bottom of the housing. [Figure 1.3]
4. Push the cover securely closed. [Figure 1.4] The air purifier
uses a magnetic safety trigger to make sure that the filter
cover is closed. If not properly closed, the air purifier will not
turn on.
Loading ...
Loading ...
Loading ...