Loading ...
Loading ...
Loading ...
Maintaining your washer _19
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “ND” error message is
displayed.
1. Open the filter cover by pressing and pulling the handle of the
filter cover with your finger.
2. Unscrew the drain cap by turning it
counterclockwise.
3. Hold the cap on the end of the drain tube and
slowly pull it out about 6 inches (15 cm) and
drain off all the water.
4. Remove the debris filter cap.
5. Wash any dirt or other material from
the debris filter. Make sure the drain
pump propeller behind the debris filter
is not blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
04 Maintaining your washer
Step 1 Step 2
WF338AA-02562A-06_EN.indd 19 2009-12-22 ¿ÀÀü 11:07:52
Loading ...
Loading ...
Loading ...