Loading ...
Loading ...
Loading ...
en
29
When the freezer compartment has
reached its set temperature,
the display 8 “AL” goes out.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
The refrigeration system may cause
several areas of the freezer shelves to
frost quickly. The appliance does not
require defrosting until the entire
surface of the freezer shelf is covered
with more than 5 mm of frost or ice.
Setting
the temperature
Fig.
Refrigerator compartment
The temperature can be set from
+2 °C to +11 °C.
1. Using the selection button refrigerator
compartment 5 to select refrigerator
compartment.
2. Using the temperature selection
button 6, to set the required
refrigerator compartment temperature.
Freezer compartment
The temperature can be set from
1C to–2C.
1. Using the selection button freezer
compartment 4 to select freezer
compartment.
2. Using the temperature selection
button 6, to set the required freezer
compartment temperature.
Alarm function
Switching off the warning signal
Fig.
Press the “alarm” button 2 to switch off
the warning signal.
Temperature alarm
The temperature alarm switches on if
the freezer compartment is too warm
and the frozen food is at risk of thawing.
“AL” flashes on the display 8.
When the alarm button 2 is pressed,
the temperature display indicates for five
seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted. Display 8
indicates the set freezer compartment
temperature without flashing.
Henceforth the “warmest temperature”
will be redefined and stored.
The alarm may switch on without any risk
to the frozen food:
when the appliance is switched on,
when large quantities of fresh food are
placed in the appliance.
Note
Do not refreeze thawing or thawed food.
It can only be refrozen when it has been
used to prepare a ready meal (boiled
or fried).
No longer store the frozen produce for
the max. storage period.
Loading ...
Loading ...
Loading ...