W11028050
Specifications
3
Contents
CYCLE / PROGRAM GUIDE - STAINWASH
11
USING YOUR WASHER
13
USING THE SPECIAL STAINWASH PROGRAM
15
USING THE SPECIAL ANTI-BACTERIAL PROGRAM
16
CYCLE TIME
17
SPECIAL FEATURES
19
TROUBLE SHOOTING
20
WASHER MAINTENANCE
21
TIPS FOR HASSLE-FREE PERFORMANCE
22
WIRING DIAGRAM
23
SAFETY PRECAUTIONS
25
SPECIFICATIONS
26
KNOW YOUR STAINWASH MACHINE
4
6
CONTROL PANEL AND FEATURES - STAINWASH
9
26
Specification
Capacity (Dry Linen )
Type of Wash System
Wash Speed
Spin Speed
Machine Weight (kg)
Heater Rating
Basket
Soak
Delay Feature
Auto Restart
Lint Filter
Rat Mesh
Dimensions ( W X D X H ) all in mm
Water Pressure
Power Supply
Input Power ( Motor Rating )
Machine Class
7.5kg
360 W
540x560x1005
WTW750AF
Agipeller
15-21 str/min ( Based on program selected )
740 rpm
1450 W
Stainless Steel
Yes
Yes
220-230V AC, 50 Hz, 13 A
Yes
Yes ( MAGIC )
Yes
8.0kg
575 W
620x630x1050
WTW808AF
44
—
32
2
0.2 - 8.0 Kgf/cm (0.02-0.8 MPa)
Class 1
4
Prime Mover (Agipeller)
Assembly
Wiring Diagram /
Safety Precautions
25
Do not install the machine in a damp area such as the bathroom, with
direct exposure to shower. There is a danger of electric shock, fire,
machine trouble, corrosion and rusting.
The machine should not come in
and
s
m
c
25
Crayons, Coffee, Ketchup, Fruit Juice, Shoe
Polish, Butter, Ink, Deodorant, Tea, Mustard,
Sauce, Oil, Red Sand, Wine, Sambar, Grass,
Pickle,Dettol, Vinegar, Cough Syrup, Honey,
Soup, Mosquito Repellant Cream, Eye Brow
Pencil, Chocolates, Turmeric Powder
gives a sanitizing anti-bacterial wash at 60°C with a
6-Stage wash process, removing harmful bacteria that can cause skin diseases and infections,
there by keeping your clothes clean and bacteria-free.
tough stains.
M
C
T
NABL accredited
5
Know your Stainwash
s
. .
.
.
speed up
.
-
-
with
S
Soaking helps to dissolve
concentrated detergent
mixtures and penetrates them
into fabric again. The inbuilt
dynamic soak action helps in
loosening stains.
. This helps
.
Re
Cr
Stainwash
.
B
-
24
Wiring Diagram
7.5 kg
G / BL
G / BL
6 A
FUSE
6
10
Water Pressure :
With the new ZPF technology, the drum will fill 50% faster even at 0.02 MPa
and at a water tank height of 10ft.
For a faster flow rate, the water storage tank should correspond to
a level of 2m to 80m above the level of tap and maintain a water pressure
2 2
between 0.2 kgf/cm - 8.0 kgf/cm (0.02 mPa - 0.8 mPa) and should be
more than 10ft.
Ensure that there is no blockage in water line.
Suggestion to improve water flow rate :
,
IS
.
3 pins 230V, 50Hz, 16A.
Whirlpool Corporation
working
.
.
.
should
23
- 8.0kg
G / BL
G / BL
15 A
FUSE
Installation
W
leakage
7
Connect the inlet hose to tap
Connect the inlet hose to Machine
Remove the inlet valve cap.
R
Washer Maintenance
Tips for Hassle-Free Performance
22
,
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
Hassle - Free
are
Rules. The product therefore poses no danger to
woollen
use
working.
r
-
to prevent
.
s
s
ing
This will avoid ‘painting’ your light clothes.
leakage
W
8 21
Choking Hazard
Small parts.
Not for children under 3 years.
Do not forget to re-fix the filter after cleaning.
Failure to do so will result in death.
Pull out the detergent tray fully and lift it upwards to remove it from the detergent holder.
,
it.
continues to
.
.
and
.
.
back into
original position.
.
.
it
a
Control Panel and Feature
HARD WATER
WASH
We understand that the water hardness may vary from region to region, wherein if the hardness is high,
you would not get good wash performance.
Hence to overcome this, we have introduced the unique HARD WATER WASH which allows you to add
extra detergent (recommended through display) and the machine adopts the agitronic motion to the
fabric type you have selected and performs the washing cycle accordingly.
ULTRA CLEAN
‘Bedsheet’
‘Woollens’
and ‘Wash Only’
.
will continue.
W
,
a
9
Control Panel / Installation
,
CHECK WATER
or that filter is .
Ensure that the tap is opened or else clean the fill hose filter first and then the inlet valve filter,
if required.
Machine that will resume automatically when the normal voltage comes back.
EXPRESS WASH
DELAY WASH
, as
up to a
, the
, refer to
to Very High.
.
.
20
If display shows ‘Lid Open’ with buzzer tone,
close the Lid to continue wash process.
If display shows ‘Lid Open’ without buzzer tone,
machine is waiting for water to be filled.
Close the Lid to continue wash process.
Special Features /
Trouble Shooting
agipeller
.
This error will pop up approximately after 10 minutes, if
there is no or very low water supply.
Check if the water tap is closed / water inlet pipe filter or
inlet valve filter is blocked with foreign objects.
If yes, open the tap / clean the filter
and then press the “START / PAUSE” button again.
Always ensure that there is adequate supply of water to
the machine.
Ensure that the washer is placed on a flat surface.
If Ub is displayed with the buzzer tone, open the lid and re-distribute
the laundry. Then close the lid and press ‘Start / Pause’ button.
Note: If off-balance is detected during spin cycle, washer
automatically fills water up to very high water level and goes
to wash process to balance the laundry load. If off-balance still
persists, the user will be alerted.
PF error indicates any power failure while “Delay Wash”
feature in is use.
This for the user’s information and will not impact
the wash process.
.
.
.
.
Check if any part of the drain hose is more than 20cm high from the
floor or if the extension drain hose is longer than 3m.
Ensure that the free end of the drain hose is not hooked up in the
machine. If so, put it down on the floor.
Make sure that there is no blockage in the drain hose and it should
be flat on the floor.
are
Ensure that you have checked the above points before calling the Whirlpool Service Centre.
that
10
Control Panel and Features
HARD WATER
WASH
We understand that the water hardness may vary from region to region, where if the hardness is high,
you would not get good wash performance.
Hence to overcome this, we introduced the unique HARD WATER WASH which allows you to add
extra detergent (recommended through display) and the machine adopts the agitronic motion to the
fabric type you have selected and performs the washing cycle accordingly.
DEEP CLEAN
Deep clean will be automatically selected for Stainwash program.
Deep clean can be selected if required for 'Daily', 'Heavy', 'Bedsheet' and 'Wash only' programs.
that filter is
that
or
then the
that
.
switch off the main power.
.
into
es.
.
.
s,
to
to a
a
.
to
19
Select WASH ONLY program for water reuse
also
level
clothes
quickly, co
,
,
,
-
This feature prevents
of the
s
,
the
the
,
fibers. When these clothes are placed into the washing
machine, the threads swell up, letting the loose bits of fiber float free. In the
spin cycle, these fibers stick to your clothing.
and spin, collected lint will be
removed
from the spinning water.
If muck is allowed to build up in the machine. It can result in stains on clothes
or unpleasant odor in the washing machine.
During every Spin cycle, at the end of draining, the machine will start spinning with
water, creating a centrifugal and action which will clean tub off any impurities/dirt.
and
and
Lint are the l
2 Pieces
Hard Water Wash
C
CM
Wash
The programme used for the evaluation of (WTW808AF) under the mandatory Water Efficiency Labelling Scheme (WELS) and
the recommended Washing Programme for soiled clothes is as follows : P5-Eco
11
Cycle / Programe Guide
Anti-Bac
Bedsheet
Wash only
Hard Water Wash
Hard Water Wash
7.5kg maximum
C
CM
W
L
W
L
and S
O
This cycle uses a spin cycle to shorten drying items for heavy fabrics.
maximum for 8.0kg capacity
1.5
1.5
W
L
S
O
maximum for 8.0kg capacity
1.5
Hard Water Wash
Hard Water Wash
C
CM
Eco
Germ Free/Cold
maximum for 8.0kg capacity
Germ Free is set in default mode.
and
and
Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
3.0kg Maximum for 8.0kg capacity
and
Rinse and Spin is set in default mode.
and
Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
and
and
Very Hot is set in default mode.
and Spin set in default mode.
Germ Free is set in default mode.
Rinse and Spin is set in default mode.
Warm is set in default mode.
Double Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
Double Rinse and Spin is set in default mode.
Soak, Wash is set in default mode. (Water will not be drained after
‘wash only’ cycle, this detergent water can be reused for the next cycle.)
and
and
Warm is set in default mode.
and
and
18
Cycle Time
Cycle Time / Model :
Note : Cycle time is given only for manual water level selection. 6
'Auto' water level.
Excludes fill and drain time. Timings shown here are active wash cycle times.
‘Express wash' option is not available for P4,P6,P7, P9 & P11 programs.
To achieve the best performance, water fills up to 40% of overall volume and agitation starts, dissolving the detergent effectively to activate the enzymes.
This will be followed by Fill + agitation to enhance performance ( Applicable in High / V High water levels ). Low water wash is design intent.
Due to continuous R&D, the above timings and sequence may change without prior notice. Timings may vary from model to model and are indicative in nature.
Based on the input water temperature, voltage and water level for each program, cycle time will vary and may not match the display time.
th
Sense automatically calculates timing based on the wash load and will be indicated as
Stainwash Deep clean 7.5kg - WTW750AF
Timings 'without Express wash' option
Low High Very high Low Medium High Very high Low Medium High Very high
P1 - Daily
35 49 49 40 46 54 54 44 50 57 57
P2 - Heavy
43 57 57 50 56 66 66 53 59 69 69
P3 - Delicate
NA 34 34
P4 - Whites
76
P5 - Eco
49 59 59 53 59 63 63 56 62 65 65
P6 - Stainwash
96
P7 - Woolens
32
P8 - Bedsheet
45 61 61 52 58 70 70 55 62 71 71
P9 - Rinse + spin
17 19 19
P10 - Spin only
P11 - Wash only
18
33 33
23 30
38 38
27 34
41 41
Timings 'with Express wash' option
Low High Very high Low Medium High Very high Low Medium High Very high
P1 - Daily
22
29 29
26 30 34 34 28 32 36 36
P2 - Heavy
26
34 34 32 36 42 42
33 37 43 43
P3 - Delicate
NA 21 21
P4 - Whites
P5 - Eco
40 43 43 43 47 48 48 45 48 49 49
P6 - Stainwash
P7 - Woolens
P8 - Bedsheet
27 35 35 32 36 43 43 34 38 44 44
P9 - Rinse + spin
12 13 13
P10 - Spin only
P11 - Wash only
11 19 19 15 19
24 24
17 21 25 25
NA NA
Program
Total time in mins(Without Hard water / DC wash ) Total time in mins (With Hard water wash ) Total time in mins (With Deep clean wash )
5
NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA
Program
Total time in mins(Without Hard water / DC wash ) Total time in mins (With Hard water wash ) Total time in mins (With Deep clean wash )
NA NA
NA
NA NA
NA
NA NA
NA
NA NA
NA
NA NA
NA NA
12
Control Panel / Installation
Cycle / Programe Guide
Bedsheet
Wash only
- for 7.5kg capacity
( Water will not be drained after ‘wash only’ cycle.
This detergent water can be reused for the next cycle. )
2.0kg Max. - for 7.5kg capacity
Hard Water Wash
Deep Clean
1.5
Soak, Deep Clean, Wash, Rinse and Spin is in default mode.
Hard Water Wash
Deep Clean
Hard Water Wash
Deep Clean
Hard Water Wash
Deep Clean
Wash
Eco
The programme used for the evaluation of (WTW750AF) under the mandatory Water Efficiency Labelling Scheme (WELS) and
the recommended Washing Programme for soiled clothes is as follows : P5-Eco
Hard Water Wash
Deep Clean
and
Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
and .
and
Rinse and Spin is set in default mode.
and .
.
Rinse and Spin is set in default mode.
and
Rinse and Spin is set in default mode.
Rinse and Spin is set in default mode.
and
Rinse and Spin is set in default mode.
17
Cycle Time / Model :
Note : Cycle time is given only for manual water level selection. 6
'Auto' water level.
Excludes fill and drain time. Timings shown here are active wash cycle time.
Express wash' option is not available for P4,P6,P7, P9 & P11 programs.
To achieve the best performance, water fills upto 40% of overall volume and agitation starts, dissolving the detergent effectively to activate the enzymes.
This will be followed by Fill + agitation to enhance performance ( Applicable in High / V High water levels ). Low water wash is design intent.
Due to continuous R&D, the above timings and sequence may change without prior notice. Timings may vary from model to model and are indicative in nature.
Based on the input water temperature, voltage and water level for each program, cycle time will vary and may not match the display time.
th
Sense automatically calculates timing based on the wash load and will be indicated as
Cycle Time
Using the Special Anti Bacterial Program
Stainwash Ultra 8kg - WTW808AF
Low Medium High Very high Low Medium High Very high
P1 - Daily 35 40 48 48 40 46 56 56
P2 - Heavy 43 47 53 53 48 54 63 63
P3 - Delicate NA 30 36 36
P4 - Whites 78
P5 - Eco 50 56 60 60 56 62 66 66
P6 - Anti bacterial 50
P7 - Woolens 33
P8 - Bedsheet 48 55 58 58 52 60 67 67
P9 - Stainwash 96
P10 - Rinse + spin 20 22 22 22
P11 - Spin only
P12 - Wash only 19 23 30 30 24 29 38 38
Timings 'with Express wash' option
Low Medium High Very high Low Medium High Very high
P1 - Daily 22 24 28 28 26 29 35 35
P2 - Heavy 27 29 32 32 31 35 40 40
P3 - Delicate NA 19 22 22
P4 - Whites
P5 - Eco 40 43 44 44 45 48 49 49
P6 - Anti bacterial
P7 - Woolens
P8 - Bedsheet 29 33 35 35 33 38 42 42
P9 - Stainwash
P10 - Rinse + spin 13 14 14 14
P11 - Spin only
P12 - Wash only 12 14 17 17 16 19 24 24
NA
NA NA
NA NA
NA
6 NA
Total time in mins
(Without Hard water wash )
Total time in mins
(With Hard water wash )
NA
NA NA
NA NA
Program
NA NA
NA NA
NA NA
Program
Total time in mins
(Without Hard water wash )
Total time in mins
(With Hard water wash )
NA NA
NA
NA NA
13
Ensure that collar, cuff, dress hem and
pockets are pre-treated by brushing
them with pre-wash products.
and
Ensure that the clothes are loaded
well below the balance ring.
Ensure that small clothes are loaded
in middle of the basket for best
performance.
Cycle Guide /
Using your Washer
minimum
.
.
-
.
16
Using the Special
Anti-Bacterial Program / Model
‘P6’
cloth load
cloth load
The default Ultra Clean / Temperature
option will be “ GERM FREE”.
Water is heated up to 60°C
M C
performance
,
.
.
.
B
appropriate
.
.
T
.
Anti-Bacterial
Anti-Bacterial
.
in some cases.
.
.
.
3 hours.
14
ULTRA CLEAN (HOT WASH )
Ultra Clean
‘Bedsheet’
Germ free is applicable only for Stain Wash program
Hot wash option can be selected if required for ‘Daily’,
‘Heavy’ and 'Wash only' programs
• This feature helps you to set a delayed finish to
your wash process.
• A delay can be set between 3 - 24 hours in intervals
of 1 hour. Press this key repeatedly to reach the
desired delay time (Displayed in the “Digital
display”) in terms of hours.
• For example, to set a delay of 4 hours, press the
button till the display shows H : 04 and continue.
HARD WATER
WASH
We understand that water hardness may vary
from region to region. Where hardness is high,
you will not get better performance.
Hence to overcome this, we have introduced the
unique HARD WATER WASH which allows you
to add extra detergent (recommended through
display). The machine adopts the
agitronic motion to the fabric type you have
selected and performs the washing cycle
accordingly.
Detergent quantity will be displayed in
terms of number of cups after sensing
(6th Sense) the wash load. 1 cup =
Approximate (epellont) 35g of compact detergent.
Low sud / foam detergent recommended for
better results.
,
,
For Stain Wash ULTRA
Anti-Bac
and
set to default mode
desired
cycles.
,
.
to
.
15
‘P9’
cloth load
cloth load
The total wash time depends on inlet water temperature. In most cases it takes
up to 2 hours.
The best performance is guaranteed if you use the appropriate amount of
detergent. Use 4 scoops (~ 140g) of advanced compact detergent for the wash
process.
You need not worry about the toughest stains on your clothes as the washing machine removes them all.
Crayons, Coffee, Ketchup, Fruit Juice, Shoe Polish, Butter, Ink, Deodorant,
Tea, Mustard Sauce, Oil, Red Sand, Wine, Sambal, Grass, Pickle, Dettol,
Vinegar, Cough Syrup, Honey, Soup, Mosquito Repellant Cream, Eye Brow
Pencil, Chocolates, Turmeric Powder
The default Ultra Clean / Temperature
option will be “ GERM FREE”.
Water is heated up to 55°C.
Do not use the special Stainwash
on 100% synthetic clothes or
clothes that fade easily.
Using special Stainwash program on colored clothes, may lead to color fading in some cases.
Please check the color fastness of clothes before using this Stainwash program.
Using the special Stainwash Program
You have to use the special Stainwash
within 48 hours of the clothes
getting stained.
.
.
.
stained
Stainwash
.
.
Using your Washer
Using the Special Stainwash Program
