Loading ...
Loading ...
Loading ...
Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-12032610) -
2019 - CRC - 3/26/18
32 KEYS, DOORS, AND WINDOWS
4. Place the new transmitter in the
transmitter pocket in the center
console storage area.
5. Press ENGINE START/STOP.
When the transmitter is learned,
the DIC will display that it is
ready to program the next
transmitter.
6. Remove the transmitter from the
transmitter pocket and press
K
or Q on the transmitter.
To program additional
transmitters, repeat Steps 4–6.
When all additional transmitters
are programmed, press and hold
ENGINE START/STOP for
approximately 12 seconds to exit
programming mode.
7. Return the key back into the
transmitter.
8. Replace the key lock cylinder
cap. See Door Locks 0 35.
Starting the Vehicle with a Low
Transmitter Battery
If the transmitter battery is weak, or if
there is interference with the signal,
the DIC may display NO REMOTE
DETECTED or NO REMOTE KEY WAS
DETECTED PLACE KEY IN
TRANSMITTER POCKET THEN
START YOUR VEHICLE when you tr y
to start the vehicle.
To start the vehicle:
1. Open the center console
storage area.
2. Place the transmitter in the
transmitter pocket.
3. With the vehicle in P (Park) or
N (Neutral), press the brake pedal
and ENGINE START/STOP.
Replace the transmitter batter y
as soon as possible.
Battery Replacement
Caution
When replacing the batter y, do not
touch any of the circuitry on the
transmitter. Static from your body
could damage the transmitter.
Loading ...
Loading ...
Loading ...