Loading ...
Loading ...
Loading ...
Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-12032610) -
2019 - CRC - 3/26/18
VEHICLE CARE 285
Use this rotation pattern when
rotating the tires.
Do not include the spare tire in
the tire rotation.
Adjust the front and rear tires to
the recommended inflation
pressure on the Tire and Loading
Information label after the tires
have been rotated. See Tire
Pressure 0 278 and Vehicle Load
Limits 0 178.
Reset the Tire Pressure Monitor
System. See Tire Pressure Monitor
Operation 0 281.
Check that all wheel nuts are
properly tightened. See “Wheel
Nut Torque” under Capacities and
Specifications 0 336.
{
Warning
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause a crash. When
changing a wheel, remove any rust
or dirt from places where the wheel
attaches to the vehicle. In an
emergency, a cloth or a paper towel
can be used; however, use a scraper
or wire brush later to remove all
rust or dirt.
Lightly coat the center of the
wheel hub with wheel bearing
grease after a wheel change or tire
rotation to prevent corrosion or
rust build-up. Do not get grease
on the flat wheel mounting
surface or on the wheel nuts or
bolts.
When It Is Time for New
Tires
Factors such as maintenance,
temperatures, driving speeds, vehicle
loading, and road conditions affect the
wear rate of the tires.
Treadwear indicators are one way to
tell when it is time for new tires.
Treadwear indicators appear when the
tires have only 1.6 mm (1/16 in) or
less of tread remaining. See Tire
Inspection 0 284 and Tire Rotation
0 284.
Loading ...
Loading ...
Loading ...