Loading ...
Loading ...
Loading ...
6
www.electrolux.com
5. LIGHTING
•
F
or replacement contact Service. To purchase contact Spare parts.
4. CONTROLS
Button Function Led
L Turns the lights on/off at maximum strength. -
T1 Turns the motor on/off at speed one. -
T2 Turns the Motor on at speed two. -
Press and hold the button for approximately 5 seconds, with all the loads
turned off (Motor and Lights), to turn the Activated Charcoal Filter alarm
To turn the alarm off, press the button again and hold for at least 5 seconds.
Flashing
T3 Turns the Motor on at speed three. -
Press and hold the button for approximately 3 seconds, with all the loads
turned off (Motor and Lights), to perform a reset. The LED S1
three times.
Flashing
T4 Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed that was set before. If it is activated with
the motor turned off, the hood will switch to OFF at the end of the time.
-
Press and hold for 5 seconds to enable the remote control, indicated by
Press and hold for 5 seconds to disable the remote control, indicated by
Flashing
S1 Signals the Metal Grease Filter saturation alarm, indicating that it is
been in operation for 100 working hours.
Fixed
When this is activated, it signals the Activated Charcoal Filter saturation
must also be washed. The Activated Charcoal Filter saturation alarm comes
into operation after the Hood has been working for 200 hours.
Flashing
Hob2
Hood
remote
control
NOTE: This Hood can be switched on remotely by certain cooktops that
have compatible Hob to Hood capability.
To switch on/off the Hob to Hood function, press and hold ܼfor 3 seconds,
the indicator LED will flash twice to confirm the function is activated.
To disable this function, press and hold ܼfor 3 seconds, the LED will flash
once to confirm the function has been disabled.
Loading ...
Loading ...