Loading ...
Loading ...
Loading ...
12
Turn cycle knob to choose your wash cycle.
8. Select cycle
9. Select Temperature
12. Select cycle options, if desired
If you would like to add an Extra Rinse and/or Oxi option,
touch the button for that feature.
14. Touch and hold START/PAUSE
button to begin wash cycle
Touch and hold START/PAUSE for up to 3 seconds to start
the wash cycle. When the cycle has nished, the end of cycle
signal will sound (if set). Promptly remove items when
cycle is done to avoid odor, reduce wrinkling, and prevent
rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid will
unlock once the washer movement has stopped. This may
take several minutes if the load was spinning at a high speed.
Then close lid and touch and hold START/PAUSE again for up
to 3 seconds to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes, the
water will pump out and F8E6 error code will appear on the
display.
Once you select a cycle, select the soil level by touching the
Soil Level button to the desired setting.
Once you select a cycle, select the wash temperature by
touching the Temperature button until it reaches the desired
setting. Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum temperature.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your items. If not sure on which temperature
to use, refer to the “Cycle Guide” chart or select a cooler
temperature.
10. Select SOIL LEVEL
Light soils
Colors
that bleed
or fade
Heavy
soils
Whites
Pastels
Moderate
soils
Bright
colors
11. Select SPIN SPEED
Once you select a cycle, you may adjust the spin speed by
touching the Spin Speed button until you reach the
desired setting.
13. Select DEEP FILL mode, if desired
Once you select a cycle, you may add additional water to
the wash by pressing the Deep Fill button.
Loading ...
Loading ...
Loading ...