User Manual - Page 8

For NS-CF17BK9. Also, The document are for others Insignia models: NS-CF26BK9, NS-CF26WH9

Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
8
1.7 or 2.6 Cu. Ft. Compact Refrigerator
Finding a suitable location
Allow 5 inches (12.7 cm) of space between the back and sides of your refrigerator and any surrounding walls. This
allows proper air ventilation.
Adjust the feet to keep your refrigerator level.
If you locate your refrigerator next to a wall, allow sufficient space on the hinge side for the door to swing open.
Position your refrigerator away from direct sunlight and sources of heat, such as a stove, heater, or radiator. Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extremely cold
temperatures may also prevent your refrigerator from performing correctly.
Providing the correct power source
Check your local power source. Your refrigerator requires a 115V, 60Hz power supply.
Leveling your refrigerator
Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close
or seal correctly which can cause cooling, frost, or moisture problems.
To level your refrigerator, rotate the leveling feet clockwise (to raise) your refrigerator or counter-clockwise (to lower).
Reversing the refrigerator door
You will need the following tools to reverse the refrigerator door:
1 Unplug your refrigerator, then remove all contents.
2 Adjust the leveling feet to their highest positions.
3 Remove the screw holding the top hinge cover to the top of your refrigerator, then remove the cover.
4 Remove the screws and pin holding the top hinge to your refrigerator, then remove the hinge.
WARNINGS:
Make sure that:
The power outlet accepts a 3-prong grounding plug. The third prong on the power cord plug grounds your refrigerator to minimize
the possibility of electric shock. Do not modify the power plug.
You do NOT plug anything else into the same power outlet as your refrigerator. You may overload the circuit which can cause a fire.
You do NOT use an extension cord. If your refrigerator is too far from the power outlet, move your refrigerator or have a electrician
install a plug closer to your refrigerator.
The power outlet cannot be turned off with a switch or pull string.
Note: To make it easier to adjust the feet, have someone push against the top of your refrigerator to tilt it slightly.
CAUTIONS:
To avoid serious injury or death from electrical shock, unplug your refrigerator before you reverse the door.
To remove the door, you have to tilt your refrigerator backwards. To avoid personal injury and property damage, get another
person to tilt your refrigerator while you reverse the door. You can also lean your refrigerator against something solid, like a chair,
just below the top panel.
DO NOT lay your refrigerator flat because you may damage the coolant system.
3-prong
outlet
Outlet
cover
3-prong
plug
Grounding lead
Grounding
adapter
Outlet
cover
Screw
Outlet
Using a 3-prong plug and outlet Using a grounding adapter
10 mm nut driver
Phillips
screwdriver
NS-CF17BK9_26BK9_26WH9_17-0786__MAN_V1_EN.fm Page 8 Tuesday, December 19, 2017 9:12 AM
Loading ...
Loading ...
Loading ...