1. Check if the water tank contains enough fresh drinking water.
2. Turn the machine on by pressing the power button. The button
will blink red while the machine is heating up, this will take
approximately 40 seconds. When the machine is ready the power
button with be a steady green.
3. Adjust the drip tray to accommodate the height of your cup
4. Raise the locking handle to the open position and remove the
capsule tray.
5. Using the scroll-wheel, adjust the number of green bars to match
the image on the front of the capsule.
6. Place your capsule into the capsule holder and insert it back into
the machine. Close the locking handle.
7. Select the hot (red) or cold (blue) button based on your desired
beverage temperature.
8. After your beverage finishes preparation, the bar display will flash,
and the power button will blink red (about 5 seconds). Do not open
the locking handle while the button is blinking.
9. Once the power button stops blinking, your beverage is ready and
can be removed from the drip tray.
10. Open the locking handle and pull out the capsule holder. Dump
the capsule holder to discard the used capsule. Do not touch the
capsule directly with your hand. If your beverage requires two
capsules, insert the second capsule into the holder and repeat
steps 7-9.
11. Rinse the empty capsule holder with fresh drinking water. Dry
capsule holder and insert back into machine.
USER INSTRUCTIONS
(TO BE KEPT WITH MACHINE AT ALL TIMES)
J K L
M N
P Q
J K L
M N
P Q
J K L
M N
P Q
J K L
M N
P Q
J K L
M N
P Q
J K L
M N
P Q
J K L
M N
P Q
Loading ...