Loading ...
Loading ...
Loading ...
9
Control Panel — ZBD5700 & ZBD5900
Dishwasher
You can locate
your model
number on the
left inside of your
dishwasher tub.
Throughout this
manual, features
and appearance
may vary from
your model.
Rinse &
Hold
Fast
Wash
Normal
Wash
Super
Wash
Heated
Dry
Water
Temp
Delay
Start
Clear
2
6
4
Pre-Wash
Wash
Rinse
Dry
Clean
Cycle Status
Indicators
Cycle Selections
Option Selections
Normal
Boost
Sani
1
2
4
5
6
3
Control
Settings
1.
Cycle Status Indicators—
This display tells you what is happening while the dishwasher is in operation.
PRE-WASH Displayed until the pre-wash periods are complete.
WASH
Displayed until the main wash period
is complete
.
RINSE Displayed until rinse periods are complete.
DRY Displayed until dry period is complete (if HEATED DRY is selected).
CLEAN Displayed when cycle is complete. Light remains ON until the door is opened.
2. Cycle Selections—Press desired cycle button, you will hear a beep and the light under the button will
come ON indicating your selection. You may change this selection by pressing the
button of the new wash cycle within 15 seconds.
RINSE &
For rinsing partial loads that will be washed later. Do not use detergent with
HOLD
this cycle.
FAST
For recently used, lightly soiled loads to be washed in a short time.
WASH
NORMAL
For loads of everyday dishes, glasses and cookware with medium soils.
WASH
SUPER For heavily-soiled dishes or cookware with dried-on or baked-on soils.
WASH Everyday dishes may be included. This cycle may not remove burned-on foods.
3. HEATED DRY—When selected, turns the drying heater on for fast drying. This will extend the time
to your wash cycle. When this is NOT selected, the dishes air dry naturally and energy
is saved. HEATED DRY is not available on RINSE & HOLD.
Cycle Status
Indicators
At the start of a cycle all Cycle Status Indicators relevant to that program are illuminated. As the
program progresses, each Cycle Status Indicator switches off to show what stage of your wash has
finished. Your wash is complete when the CLEAN light is illuminated.
All of the Cycle Status Indicators will flash on
and off if either the door is opened during a cycle or
if the cycle has been paused.
Loading ...
Loading ...
Loading ...