Loading ...
Loading ...
Loading ...
11
Control Panel — ZBD5700 & ZBD5900
Dishwasher
Auto
Memory
Your dishwasher has the ability to remember what options you like with any particular wash cycle.
This means that if you select NORMAL WASH your dishwasher will automatically select the
options that you selected last time you washed with the NORMAL WASH cycle. This memory
function works with NORMAL WASH and SUPER cycles. You can change the options that have
been remembered with a particular wash cycle if you require.
NOTE: Pressing the CLEAR button at the end of a wash cycle does not interfere with this
automatic memory function.
What
happens in
each cycle
based on the
NORMAL
Option
Selection
at 120°F.
inlet water
temperature
Water Use
Gallons
(approx.)
Cycle Time
Minutes
(approx.)
Cycle Sequence
RINSE & HOLD
FAST WASH
NORMAL WASH
SUPER WASH
RinseRinseRinseMain WashPre-Wash
RinseRinseRinseMain WashPre-Wash
RinseRinseRinseMain WashPre-Wash
RinseRinseRinseMain WashPre-Wash
Cycles
1.7
6.1
6.7
8.4
8
49
75
106
Additional Times for Optional Selections:
HEATED DRY = 11 minutes
WATER TEMP—BOOST = 6–19 minutes
WATER TEMP—SANI = 23–57 minutes
Detergent
Usage
Guide
(Powder or
Liquid)
SOFT WATER MEDIUM WATER HARD WATER
0–3 grains 3–7 grains 7–12 grains*
CYCLES Main Cup Open Cup Main Cup Open Cup Main Cup Open Cup
SUPER WASH Full None Full Full Full Full
NORMAL WASH
1
⁄2 Full None Full None Full Full
FAST WASH
1
⁄
2
Full None Full None Full Full
RINSE & HOLD Use no detergent Use no detergent Use no detergent
*12 grains and up is extremely hard water. A water softener
is recommended. Without it, lime can build up in the water
valve. The water valve may stick and flooding could occur.
NOTE: The above chart is a general guide. Detergent
amounts should be adjusted depending on the amount
and type of soil until satisfactory results are achieved.
Child
Lockout
Mode
To reduce the possibility of children starting the dishwasher when unattended, a child lockout
feature can be enabled. Once enabled, each button must be pressed and held for two seconds until
you hear a BEEP, before the dishwasher will respond.
This feature can be enabled by pressing both the CLEAR and RINSE & HOLD buttons together
and holding both for two seconds. You will hear three BEEPS when the child lockout is enabled.
The child lockout can be cancelled by pressing the CLEAR and RINSE & HOLD together and
holding both pressed for two seconds until a single BEEP is heard.
NOTE: Child lockout overrides tone silencing.
Loading ...
Loading ...
Loading ...