Loading ...
Loading ...
Loading ...
English - 10
SETTING THE TIME
Your microwave oven is equipped with a built-in clock. Set
the clock when first installing your microwave oven and
after a power failure. The time is displayed whenever the
microwave oven is not being used.
1. Press the Clock button.
2. Use the number buttons to enter the current time.
You need to press at least three numbers to set the
clock. For example, if the current time is 5:00, press
5, 0, 0. The display will show: 500.
3. Press the Clock button.
4. Use the Clock button to select AM / PM.
5. Press the ENTER/START button.
6. A colon appears indicating that the time is set.
To check the time while cooking, press the Clock
button.
CHILD LOCK
The Child Lock function allows you to lock the buttons so
that the microwave oven cannot be operated accidentally.
The oven can be locked at any time.
Activating/Deactivating
If you want to activate or deactivate the child lock function,
press the STOP/CLEAR button for 3 seconds.
The display will show CHILD LOCK ON when the oven is
locked, and then re-displays the time.
OPTIONS
You can customize your new microwave oven to suit your
preferences. To customize:
1. Press the Options button.
2. Press the number button that corresponds to the
function you want to customize.
3. Press the number that corresponds to the option you
want to set.
4. Press the ENTER/START button to set the option.
The functions, options, and corresponding number buttons
are listed in the table below.
No. Function Options
1 Weight mode selected
1
2
Lbs.
Kg. (Gram)
2 Clock display control
1
2
12HR
24HR
3 Sound on/o control
1
2
Sound ON
Sound OFF
4 Remind end signal
1
2
ON
OFF
5 Daylight Saving time
1
2
ON
OFF
6 Demo mode
1
2
ON
OFF
7 Filter Reminder
1
2
ON
OFF
Filter Reminder
The filter should be cleaned or replaced once every four
months. When it is time to clean or replace the filter, the
microwave displays the “Filter” message to remind you to
clean or replace the filter. To remove the message, touch
the number 0 when the microwave is in standby mode, or
access Options.
Loading ...
Loading ...
Loading ...