Loading ...
Loading ...
Loading ...
FIGURE 3
FAUCET MOUNTING
FIGURE 4
BASKET STRAINER
MOUNTING
SINK TOP
\ ,,
MOUNTING THE FAUCET
Place rubber washers over body shanks. Place faucet body
shanks through sink top holes. Be sure to have hot water
valve on left side as you face front of unit. Go to rear of unit
and assemble shank washers and lock nuts to body shanks
as shown in Figure 3. Tighten Iocknuts with adjustable
wrench. This will secure faucet body to sink top. Attach
faucet stem to body as shown in Figure 3. Make sure
threaded collar on faucet stem makes contact with neck on
body cover. This will assure a tight seal around the collar of
the faucet stem.
TABLE 3 (REF: FIGURE 3)
ITEM NO. DESCRIPTION QUANTITY
17 FAUCET STEM 1
18 HOT WATER SHUT OFF 1
19 COLD WATER SHUT OFF 1
20 RUBBER WASHER 2
21 SHANK WASHER 2
21 SHANK WASHER 2
22 LOCKNUT 2
i
! i ,
| i
SINK BASE
MOUNTING THE BASKET STRAINER
Place rubber washer over drain body. Insert drain body
through drain hole in sink. Place paper washer over bottom
of drain body underneath sink base. Attach Iocknut at
bottom of drain body and tighten.
TABLE 4 (REF: FIGURE 4)
ITEM NO. DESCRIPTION QUANTITY
23 BASKET STOPPER 1
24 DRAIN BODY 1
25 RUBBER WASHER 1
26 PAPER WASHER 1
27 LOCKNUT 1
Loading ...
Loading ...
Loading ...