Loading ...
Loading ...
Loading ...
Safety Information Operating Instructions Troubleshooting Tips Consumer Support
Usage situations where appliance’s power cord will be disconnected
infrequently.
Because of potential safety
hazards under certain conditions,
we strongly recommend against the
use of an adapter plug. However, if
you still elect to use an adapter,
where local codes permit,
a TEMPORARY CONNECTION may
be made to a properly grounded
2-prong wall receptacle by the use of
a UL listed adapter which is available
at most local hardware stores.
The larger slot in the adapter must be aligned with the larger slot
in the wall receptacle to provide proper polarity in the connection
of the power cord.
CAUTION: Attaching the adapter ground terminal to the
wall receptacle cover screw does not ground the appliance unless the
cover screw is metal, and not insulated, and the wall receptacle is
grounded through the house wiring.
You should have the circuit checked by a qualified electrician to
make sure the receptacle is properly grounded.
When disconnecting the power cord from the adapter, always hold
the adapter with one hand. If this is not done, the adapter ground
terminal is very likely to break with repeated use. Should this
happen, DO NOT USE the appliance until a proper ground has
again been established.
Usage situations where appliance’s power cord will be disconnected
frequently.
Do not use an adapter plug in these situations because frequent
disconnection of the power cord places undue strain on the adapter
and leads to eventual failure of the adapter ground terminal. You
should have the 2-prong wall receptacle replaced with a 3-prong
(grounding) receptacle by a qualified electrician before using the
appliance.
ADAPTER PLUGS
9
Ensure proper ground
and firm connection
before use.
TEMPORARY
METHOD
Align large
prongs/slots
(Adapter plugs not
permitted in Canada)
Loading ...
Loading ...
Loading ...