Loading ...
Loading ...
Loading ...
5
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
BEFORE FIRST USE
• Wash the Cutting Blade and Meat/Food Holder in warm
soapy water.
• DO NOT WASH ANY PART OF THIS APPLIANCE USING A
DISHWASHER.
• Use a damp cloth to clean the rest of the Meat Slicer.
• NEVER SUBMERGE THE MEAT SLICER BASE IN WATER OR
ANY OTHER LIQUID!
• Dry all parts thoroughly before reassembling the unit for
use or storage.
• Do not use any abrasive soaps, detergents, or cleaning
materials to clean any part of this appliance.
NOTE:
Remove all
packaging from your
new Electric Meat
Slicer. Clean all parts
before using for the
rst time to remove
any dust that may
have accumulated
while the appliance
was in its original
packaging. (See
“CLEANING AND
MAINTENANCE”
section for further
instructions)
NOTE:
It helps to pull the
Feed Slider Table (4)
back and out of the
way when attempting
to secure the Cutting
Blade (3).
CAUTION:
Make sure that all
parts have been
properly assembled
and that the cutting
blade (3) has been
secured before
operating your meat
slicer.
ASSEMBLY
• Never set the slicer on top of a hot surface or near an open
ame.
• Make sure that the power cord does not pass over any hot
or sharp edged objects.
• Do not let the power cord hang off of your work surface
or be positioned in such a way where it can be easily or
accidentally pulled, as this could lead to injury or damage
to the unit.
• Do not allow the power cord to become tangled or
trapped. Never wind the power cord around the slicer
during storage.
• Make sure the unit is off and unplugged from the electrical
while assembling it.
1. Place the meat slicer on a at, stable, non-slip surface close
to an electrical socket and away from any edges or places
where it can easily fall off.
2. Place the Cutting Blade (3) in its designated place beneath
the Blade Guard (11). Align the back of the locking piece on
the Cutting Blade (3) with the groove on the area beneath
the Blade Guard (11). Turn the locking piece to the left
to lock the Cutting Blade (3) in place; turning the locking
piece to the right unlocks the Cutting Blade (3).
3. Place the Meat/Food Holder (5) on the Feed Slider Table (4).
4. Place your desired meat, cheese, or vegetable on the Feed
Slider Table (4).
5. Unwind the required length of power cord; insert the plug
into a power outlet.
5
Loading ...
Loading ...
Loading ...