Loading ...
Loading ...
Loading ...
9
PROBLEM REASON SOLUTION
Lid does not lock. The Silicone Sealing Gasket is not
properly installed in the lid.
Remove the Silicone Sealing
Gasket and re-install as
instructed on page 5 of the
instruction booklet.
The Red Safety Valve is not rising.
1. The Pressure Release Valve is
not placed properly.
2. There is not enough liquid in
the cooking pot.
3. Air is escaping from the rim of
the lid or Red Safety Valve.
1. Remove and re-insert the
Pressure Release Valve. See
Cleaning and Maintenance,
No. 3, pg. 7.
2. Check recipe for liquid capacity
(must be at least 1 cup).
3. Check the placement of the
Silicone Sealing Gasket and
Red Safety Valve Gasket.
Steam escapes from the
underside of the lid.
1. Silicone Sealing Gasket is not
properly aligned.
2. Silicone Sealing Gasket is dirty.
1. Clean the Silicone Sealing
Gasket, cooking pot rim,
and lid.
2. Replace the Silicone
Sealing Gasket.
3. Remove the Silicone
Sealing Gasket and re-install
as instructed on page 5 of the
information booklet.
Steam and liquid leaks from the
Red Safety Valve.
The Pressure Release Valve is
obstructed.
Take the cooker off of the stove.
Once it is cool, remove the
Pressure Release Valve and clean
to remove the obstruction.
Lid does not fi t properly.
1. The lid is not aligned properly
with the cooking pot.
2. The Silicone Sealing Gasket is
not properly aligned.
1. Replace the lid of the pressure
cooker.
2. Remove lid and re-attach
as instructed on pg. 6 of the
instruction booklet.
3. Re-align the Silicone
Sealing Gasket.
When cooking, the Silicone
Sealing Gasket is suddenly
protruding out from the Safety
Window.
The Red Safety Valve or Pressure
Release Valve is obstructed.
Remove the cooker off heat.
Once cooled, clean and check all
the components.
Lid does not open after all
pressure has been released.
1. The Red Safety Valve is still up.
2. Lid was turned to unlock before
all pressure was released.
1. Slide the Pressure Regulator
to the Quick Release setting.
Ensure all pressure is released
and Red Safety Valve should
drop.
2. Turn lid clockwise to unlock
position and remove the lid.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...