Loading ...
Loading ...
Loading ...
16
Condensation is
forming on faucet.
It is normal to
see conden-
sation forming
on the faucet. It
is caused by a
difference in
temperature
between the
cold beer and
the surfaces of
the faucet when
beer is flowing
through the line.
Beer that is left
in the faucet is
not cooled by
the
beer
dispenser.
After a period of non-use, a few ounces should
be drained before drinking.
TROUBLESHOOTING
You can solve many common Beer Dispenser problems easily, saving you the cost of
a possible service call. Try the suggestions below to see if you can solve the problem
before calling the servicer.
PROBLEM POSSIBLE CAUSE
The unit is not working
- Check that the plug is inserted correctly into the wall
socket.
- Check that there is power to the wall socket by
plugging in another appliance.
- Check the fuse.
The unit is noisy when running
-
Check to make sure that the cooler is level and it is not
in contact with another appliance or furniture.
NOTE: A gentle trickling sound is normal; this is likely
coolant in the sealed system or condensate water
from the unit.
The unit does not cool
sufficiently
- If the door has been opened too often, or it has been
left open for a while it will take time for the cooler to
reach its set temperature.
- Check that the airflow from the rear of the cooler has
not been reduced or obstructed due to insufficient
clearance.
Loading ...
Loading ...
Loading ...