Loading ...
Loading ...
Loading ...
Setting Up _15
01 SETTING UP
ADJUSTING THE FREEZER DRAWER LEVEL
1. Locate the height-adjuster (
1
) in the freezer drawer.
Unscrew the four Phillips screws (
2
) slightly to loosen the door.
2. Loosen the controller screw(
3
) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, tighten the screws (
2
)&(
3
) in reverse order.
CASE) The slope is about 2mm (0.08inch) as shown below.
- Rotate down the adjuster-face with +2.0 number to reduce
the door slope.
- The number of the adjuster to rotate depends on the slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part
1
2
3
Loading ...
Loading ...
Loading ...