Loading ...
Loading ...
Loading ...
User instructions
16
2. Operating instructions
Once the dishwasher has been correctly installed, prepare for use as
follows:
• Adjust the water softening system;
• Add the regenerating salt;
• Add the rinse aid and detergent.
2.1 Using the water softening system
The dishwasher is equipped with an
automatic softening system which uses a
special regenerating salt to reduce the
hardness of the water, which causes
whitish marks on dry dishes.
The dishwasher is factory set for water
hardness level 3.
When using water of medium hardness, the regenerating salt container
should be refilled after approximately 20 washing cycles. The salt
container can hold approximately 1.7 kg of salt in grains. Some models
are equipped with a cap with a no-salt optical indicator containing a
green float which descends as the salt concentration in the water drps.
When the green float can no longer be seen through the transparent
cap, the container must be topped up with regenerating salt. The
container is situated at the bottom of the dishwasher. After removing the
lower basket, unscrew the salt container cap by turning it anticlockwise
and pour in the salt using the funnel supplied. Before replacing the cap,
remove any salt residues from around the opening.
•
When using the dishwasher for the first time, in addition to the salt it
is also necessary to add one litre of water to the container.
• Each time the salt container is refilled, make sure that the cap is
securely closed. The mixture of water and detergent must never
penetrate the salt container, as this would compromise the operation
of the regeneration system. In the event of this occurring, the
warranty will be invalidated.
• Only use regenerating salt specially formulated for domestic
dishwashers. If using salt tablets, do not fill the container
completely.
SALT
Loading ...
Loading ...
Loading ...