Loading ...
Loading ...
Loading ...
−
When you push the MAIN switch in,
the switch is OFF, and the
passenger’s window cannot be raised
or lowered. To cancel this feature,
push on the switch again to get it to
pop out. Keep the MAIN switch off
whenyouhavechildreninthe
vehicle so they do not injure
themselves by operating the window
unintentionally.
If the driver’s
window runs into any obstacle while
it is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
If your vehicle’s battery is
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for a second or two more.
Start the engine. Push down and
hold the driver’s window switch
until the window is fully open.
Press the UNLOCK button once
to unlock the driver’s door.
Press the UNLOCK button a
second time, and hold it. The
passenger’s door unlocks, and
both windows start to open. To
stop the windows, release the
button.
To open the windows further,
press the button again.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
You cannot close the windows with
the remote transmitter.
You can open both windows from the
outside with the remote transmitter.
1.
2.
1.
2.
3.
Power Windows
AUTO REVERSE
Opening the Windows with the
Remote Transmitter
90
０４／０８／０５ １０：４９：４２ ３１ＳＤＰ６２０ ００９３
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...