Loading ...
Loading ...
Loading ...
3
Enter the time.
4
If necessary, select an option to edit the timer:
• To automatically restart the timer after it expires, select UP
> Restart > On.
• To select a type of notification, select UP > Sounds.
5
Select GPS to start the timer.
Using the Stopwatch
1
From any screen, hold SET.
2
Select Stopwatch.
3
Select GPS to start the timer.
4
Select SET to restart the lap timer .
The total stopwatch time continues running.
5
Select GPS to stop both timers.
6
Select UP, and select an option.
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1
From any screen, hold SET.
2
Select Set Time With GPS.
3
Wait while the device locates satellites (Acquiring Satellite
Signals, page 20).
Setting Alerts
1
From any screen, hold SET.
2
Select Alerts.
3
Select an option:
• To set an alert to sound a specific number of minutes or
hours before the actual sunset occurs, select Til Sunset >
Status > On, select Time, and enter the time.
• To set an alert to sound a specific number of minutes or
hours before the actual sunrise occurs, select Til Sunrise
> Status > On, select Time, and enter the time.
• To set an alert to sound when a storm approaches, select
Storm > On, select Rate, and select the rate of pressure
change.
• To set an alert to sound every hour, select Hourly > On.
Navigation
Saving a Dual Grid Location
You can save your current location using dual grid coordinates
to navigate back to the same location later.
1
From any screen, hold GPS.
2
Select GPS.
3
If necessary, select DOWN to edit location information.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, select GPS > Navigate > Saved
Locations.
2
Select a saved location.
3
Select an option to edit the location.
Viewing the Altimeter, Barometer, and
Compass
The device contains internal altimeter, barometer, and compass
sensors with automatic calibration.
1
From any screen, hold ABC.
2
Select UP or DOWN to view separate altimeter, barometer,
and compass screens.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
1
If necessary, select GPS > Add > Project Wpt. to add the
project waypoint app to the apps list.
2
Select Yes to add the app to your list of favorites.
3
From the watch face, select GPS > Project Wpt..
4
Select UP or DOWN to set the heading.
5
Select GPS.
6
Select DOWN to select a unit of measure.
7
Select UP to enter the distance.
8
Select GPS to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1
From the watch face, select GPS > Navigate.
2
Select a category.
3
Respond to the on-screen prompts to choose a destination.
4
Select Go To.
Navigation information appears.
5
Select GPS to begin navigation.
Creating and Following a Course on Your
Device
1
From the watch face, select GPS > Navigate > Courses >
Create New.
2
Enter a name for the course, and select .
3
Select Add Location.
4
Select an option.
5
If necessary, repeat steps 3 and 4.
6
Select Done > Do Course.
Navigation information appears.
7
Select GPS to begin navigation.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access
the MOB function (Customizing the Hot Keys, page 17).
From the watch face, select GPS > Navigate > Last MOB.
Navigation 9
Loading ...
Loading ...
Loading ...