Loading ...
Loading ...
Loading ...
WARNING!
Steps to Factory Reset:
1. Disconnect the player from electrical power.
2. Wait 10 seconds
3. Reconnect the power
4. The LED will ash Blue – once you see it turn Red, touch and hold the Play/Pause icon (it will
immediately turn Green and then back to Red) – do not let go of the LED.
5. Once the LED turns back to Red, continue to hold the button for 30 seconds.
6. After 30 seconds, the LED will begin to blink red – then release the button.
All customization to the Bluesound player will be removed and restored to factory settings.
IMPORTANT: Removing your nger from the LED at any time before the LED begins ashing red will cancel the
factory reset and leave the player in Upgrade Mode. Just start the steps again to factory reset the player.
You will know the factory reset is successful if the player reconnects to the network (plugged in via Ethernet) as
if it is a new player. The default player name will be used and the LED will be solid blue.
THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK
CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE
THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING
AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT
AN AUTHORIZED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!
© Bluesound International. Bluesound, the stylized wordmark and “B” logotype, the phrase
“HiFi for a wireless generation”, VAULT 2i and all other Bluesound product names and taglines
are trademarks or registered trademarks of Bluesound International, a division of Lenbrook
Industries Limited. All other logos and services are trademarks or service marks of their
respective owners.