Loading ...
Loading ...
Loading ...
8
Before first use
1 Remove all packaging material.
2 Remove any stickers or labels from the appliance.
3 Thoroughly clean the basket and the pan with hot water, some washing-up liquid
and a non-abrasive sponge.
Note: You can also clean these parts in the dishwasher.
4 Wipe the inside and outside of the appliance with a moist cloth.
This is an Airfryer that works on hot air. Do not ll the pan with oil or frying fat.
Preparing for use
1 Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surfaces.
2 Place the basket in the pan properly (Fig. 3).
3 Pull the mains cord out of the cord storage compartment in the bottom of the
appliance.
Do not ll the pan with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airow and aects the
hot air frying result.
Using the appliance
The Airfryer can prepare a large range of ingredients. You can nd more recipes at
www.philips.com/kitchen.
Hot air frying
1 Put the mains plug in an earthed wall socket.
2 Carefully pull the pan out of the Airfryer (Fig. 4).
3 Put the ingredients in the basket (Fig. 5).
Note: Never ll the basket beyond the MAX indication or exceed the amount indicated
in the table (see section ‘Settings’ in this chapter), as this could aect the quality of
the end result.
4 Slide the pan back into the Airfryer (Fig. 6).
Never use the pan without the basket in it.
Caution: Do not touch the pan during and some time after use, as it gets very hot. Only
hold the pan by the handle.
5 Turn the temperature control knob to the required temperature. See section
‘Settings’ in this chapter to determine the right temperature (Fig. 7).
Note: If you want to prepare dierent ingredients at the same time, make sure you
check the preparation time and the temperature required for the dierent ingredients
before you start to prepare them simultaneously. Home-made fries and drumsticks,
for example, can be prepared simultaneously because they require the same settings.
6 Determine the required preparation time for the ingredient (see section ‘Settings’ in
this chapter).
7 To switch on the appliance, turn the timer knob to the required preparation
time (Fig. 8).
Add 3 minutes to the preparation time when the appliance is cold.
Loading ...
Loading ...
Loading ...