Loading ...
Loading ...
Loading ...
The Fastener Control adjustment feature provides close control of the fastener drive
depth; from flush with the work surface to shallow or deep countersink. First, set the
air pressure for consistent drive in the specific work. Then use the Fastener Control
adjustment to give the desired depth of drive.
TO ADJUST FASTENER CONTROL ADJUSTMENT:
SB-1842BN, SB1850BN, SB-1664FN FASTENER CONTROL ADJUSTMENT
Always disconnect air supply: 1. Before making adjustments; 2.
When servicing the tool; 3. When clearing a jam; 4. When tool is
not in use; 5. When moving to a different work area, as accidental
actuation may occur, possibly causing injury.
1. With air pressure set, drive a few fas
teners into a representative material
sample to determine if adjustment is
necessary.
2. If adjustment is required, disconnnect
air supply.
-13-
Depth Adjustment Knob
Depth Adjustment Knob
SB-1664FN
SB-1842BN
SB-1850BN
Loading ...