Loading ...
Loading ...
Loading ...
5
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listedhere.
Tools needed:
■ Level
■ Drill with 1
1
/
4
" (3.0 cm), 3/16" (5.0 mm) and 6/19" (8.0 mm)
drill bits
■ Pencil
■ Tape measure or ruler
■ Adhesive tape
■ Flat-blade screwdriver
■ Metal snips
■ Phillips screwdriver
■ POZI driver
■ T20
®
TORX
®†
bit or driver
Parts needed:
Part Name Qty.
Flexible duct as per
ceiling height;
external diameter
6" (15.2 cm)
1
6
"
(15.2 cm)
Steel duct clamps for
6" (15.2 cm) ducts
2
Parts supplied:
Remove parts from packages. Check that all parts are included.
Part Name Qty.
Hood canopy
assembly with
ventilator and lights
installed
1
Chimney covers 2
Charcoal lter
mounting bracket
1
Part Name Qty.
Charcoal lter 1
Charcoal lter
clamps
3
Plastic transition 1
Paper template 1
3 prong plug with
connector
1
Wire clamp 1
Ø5 x 45 mm screws 8
Ø8 x 40 mm anchors 8
3.5 x 9.5 mm screws 6
2.9 x 6.5 mm pins 2
Flat washers 3
T10
®
TORX
®†
adapter 1
†®TORX and T10
®
are registered trademarks of Acument Intellectual Properties, LLC.
Loading ...
Loading ...
Loading ...