Loading ...
Loading ...
Loading ...
Care and Cleaning
Dishwasher
10
Do NOT remove the upper spray head.
Clean with warm soapy water using a small
plastic bristle brush.
To clean the control panel, use a lightly
dampened cloth. Then dry thoroughly.
To clean and de-odorize your dishwasher, use
citric acid or Finish
®
Dishwasher Cleaner,
a detergent additive. Finish
®
Dishwasher
Cleaner will break up mineral deposits, and
remove hard water film and stains.
You can order citric acid # WD35X151
through Monogram by calling 800-444-1845 or
visiting Monogram.com. In Canada, call 800-661-
1616. You can purchase Finish
®
Dishwasher
Cleaner at your local grocery store.
Control
Panel
Exterior
Door Panel
Interior
Upper
Spray
Head
Retaining nut
Upper
Rack
Water Supply Tube
Upper Spray Arm
To remove the upper spray arm, twist the
retaining nut 45° and pull the spray arm off the
water supply tube.
To remove the lower spray arm, remove the
lower rack and lift spray arm out.
IMPORTANT: When replacing make sure to
twist lock the retaining nut securely onto the
water supply tube. Check that the spray arm is
secure and that it rotates freely.
IMPORTANT: When replacing make sure to seat
the arm clips over the retaining ring. Check that
the spray arm is secure and that it rotates freely.
Lower Spray Arm
Arm
Clips
Retaining
Ring
Before cleaning the front panel, make sure you
know what type of panel you have. Refer to the
last two letters of your model number. You can
locate your model number on the left-hand tub
wall just inside the door. If your model number
ends with II, then you have an Integrated door
panel. If your model number ends with SS, then
you have a Stainless Steel door panel.
Follow the instructions below for cleaning the
door panel for your specific model.
Integrated Door Panel (model numbers ending
in II)
This is a custom installed door panel, and you
will need to refer to the cabinet manufacturers
recommendations for proper cleaning.
Stainless Steel Door Panel (model numbers
ending in SS)
For cleaning rust and tarnish, cleaners with
oxalic acid such as Bar Keepers Friend Soft
Cleanser™ will remove rust, tarnish and small
blemishes. Use only a liquid cleanser free of grit
and rub in the direction of the brush lines with a
damp soft sponge. Do not use appliance wax or
polish on the stainless steel.
For other blemishes and marks, use Stainless
Steel Magic or a similar product using a clean soft
cloth. Do not use appliance wax, polish, bleach or
products containing chlorine on Stainless Steel.
You can order Stainless Steel Magic # WX10X29
through Monogram Preferred by calling
800-444-1845. In Canada, call 800-661-1616.
Because hard water chemicals will clog the spray
arm jets and
bearings, it is necessary to clean the
spray arms regularly.
Wash the arms in soapy, warm water and use a
soft brush to clean the jets. Replace them after
rinsing thoroughly.
Spray
Arms
Loading ...
Loading ...
Loading ...