Loading ...
Loading ...
Loading ...
Page:
7
User Manual:
Cleaning and Maintenance
By ensuring proper cleaning and maintenance of your Esatto Bar Fridge,
you can ensure that it will have a long and fault free operation.
CLEANING YOUR BAR FRIDGE
→ Warning! To avoid an electric shock, always unplug your bar fridge before cleaning.
Ignoring this warning may result in death or serious injury.
Caution. Before using any cleaning products, please read and follow the
manufacturer’s instructions and warnings to avoid any damage to your
Bar Fridge or personal injury.
→ Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
→ Remove all shelves and the salad bin. Note: To remove the salid bin you must remove the
lower shelf rst.
→ Wash the inside with a damp warm cloth containing a water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to 2L of water.
→ Wash the storage basket with a mild detergent solution.
→ Be sure to keep the door seal clean to keep the unit running eciently.
→ The outside of the freezer should be cleaned with mild detergent and warm water.
→ Dry the interior and exterior with a soft cloth.
→ The condenser coils should be carefully vacuumed when they are dusty or dirty.
→ It is recommended that the unit be cleaned each time it is defrosted to help keep the unit
odour free and running eciently.
→ Clean your door gasket seals every 3 months using the same warm water solution
described above.
VACATION TIME
→ Remove all the food.
→ Unplug the bar fridge.
→ Clean the bar fridge using the instructions above.
→ Leave the door open slightly to avoid possible formation of condensation, mould, or
odours.
→ Use extreme caution in the case of children. The unit should not be accessible to children.
→ Short vacations:
Leave the bar fridge operating during vacations of less than three weeks.
→ Long vacations:
If the bar fridge will not be used for several months, remove all food and unplug the
power cord. Clean and dry the interior thoroughly. To prevent odor and mould growth,
leave the door open slightly blocking it open if necessary or have the door removed.
MOVING YOUR BAR FRIDGE
→ Remove all the food.
→ Securely tape down all loose items inside your fridge.
→ Remove the rollers to prevent damage.
→ Tape the doors shut.
→ Be sure the fridge stays in the upright position during transportation.
ENERGY SAVING TIPS
→ The bar fridge should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
→ Let hot foods cool to room temperature before placing in the bar fridge. Overloading the
fridge forces the compressor to run longer.
→ Be sure to wrap foods properly, and wipe containers dry before placing them in the bar
fridge. This cuts down on frost build-up inside the fridge/freezer.
→ Liners interfere with cold air circulation, making the freezer less ecient.
→ Organize and label food to reduce door openings and extended searches. Remove as
many items as needed at one time, and close the door as soon as possible.
Loading ...
Loading ...
Loading ...