Loading ...
Loading ...
Loading ...
Page:
6
User Manual:
Operating Your Bar Fridge
TEMPERATURE CONTROL
Your fridge has one control for regulating the temperature. The temperature control is
located on the upper right hand side.
Depending on your rooms ambient temperature, you may need to adjust the temperature
setting to achieve your desired temperature.
The OFF setting on the thermostat control will turn the refrigerator o.
Note: If the unit is unplugged, lost power, or turned o; you must wait 3 to 5
minutes before Restarting the unit.
If you choose to change the thermostat setting, adjust thermostat control by one
numerical increment at a time. Allow several hours for temperature to stabilize between
adjustments.
NOISE FROM YOUR BAR FRIDGE
You may notice that your bar fridge makes some unusual noises from time to time. Most
of these are perfectly normal, but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system.
This is not a fault and will not affect the performance of your unit and is common with all
modern fridges.
DEFROSTING YOUR BAR FRIDGE
For the most ecient operation and minimum energy consumption, defrost the
freezer when the frost on the freezer walls is excessive or 3 to 4 mm thick. To minimize
disruption, choose a time when the stock of frozen food is low.
Important! Do not use boiling water because it may damage the plastic parts. In
addition, never use a sharp or metallic instrument to remove frost as it
may damage the cooling coils and will void the warranty. We recommend
using the plastic scraper provided with your unit.
Remove the frozen food from the freezer and place it in a cooler to protect the food.
Set the thermostat to the OFF position or unplug the bar fridge.
During defrosting, the ice melts into the cabinet.
Clean the interior of the fridge and freezer and remove any water.
Reset the thermostat to desired setting.
Allow the cabinet to cool for one hour.
Return food to the freezer.
Helpful Tip. Defrosting usually takes a few hours. Leaving the door open will help
speed the process. Also, pouring warm water (not boiling) on the ice/frost
will help speed melting. If you must use a scraper- please use caution - it
is very easy to damage the freezer compartment and void your warranty.
MAX
MED
MIN
OFF
Loading ...
Loading ...
Loading ...